User manual BEBE CONFORT ELEA

[. . . ]  he maximum weight of the child for the T support recommended by the manufacturer is 9 kg (See the support instructions).  he carrycot must not be used to transport / T store products for current consumption. t is strongly recommended that you keep I your infant secured by using the fastening system of your carrycot, whether you are using it as a carriage, a pram or a portable seat. D WARNING: WARNING: •  o not let other children play unattended D near the carry cot. [. . . ] For your safety and your child’s, always fix  the carrier in the vehicle; always strap your child in with the safety harness, however short the journey you are making.  fter putting your child in place, ensure that the A belt is suitably tight by pulling the strap. n some vehicles, the safety belt strap may be I too long and positioned too high. Use of the car safety kit is obligatory to  provide the car cot function of the carrycot. This car safety kit may only be used with the  carrier for which it is intended. If you have any questions relating to this issue, you should contact the manufacturer.  ven minor shocks which happen as a result E of a collision with another vehicle can transform your baby into a real projectile.  he user must always ensure that luggage or T items that are likely to cause injury to the occupant of the carrier in the event of a collision must be securely stowed away.  lways check that no part of the safety kit or A harness is trapped under a seat or in the door of the vehicule.  ever place heavy objects on the rear parcel N shelf to avoid them being thrown during an accident.  ever make any modifications to the N construction or materials of the car safety kit and the belt. Should not be replaced with any other than the one recommended by the manufacturer as the cover constitutes an integral part of the restraints performance. The temperature inside a car can get very high,  especially after lengthy exposure to the sun. In these conditions it is strongly recommended to cover the car safety kit with cloth or other material which will prevent the harness fitting/ fixings, and other metal components, becoming too hot and burning your child. The rigid elements and plastic parts of a child car  seat must be fitted and positioned in such a way that, under the conditions of normal vehicle use, they cannot become trapped under a mobile seat or in the door of the vehicle. This child car seat is only effective when used in accordance with the manufacturer’s instructions. 42 ) ( Maintenance After dismantling (make sure you have well noted how the various pieces are assembled on the seat in order to assemble them back properly). -  or washing the garment, please consult the F instructions on the label. [. . . ] Please contact your local Bébéconfort distributor or visit our website, www. Com When doing so please have the following information to hand: - Serial number. 43 EN ( ) •  hen the defect was caused by incorrect or W insufficient use or maintenance, neglect or impacts at the level of the textile and/or chassis. €  hen it is a case of normal wear of the parts, W such as can be expected from daily use (wheels, rotating and moving parts, etc. [. . . ]