User manual BEBE CONFORT ELIOS

[. . . ] This approval does not preclude due care and observation of the highway code. Never change the construction or materials of the seat or belt without consulting the manufacturer. Never place heavy objects on the rear parcel shelf to avoid them being flung forward in case of an accident. The user must always ensure that luggage and other objects which could injure the occupant of the seat in case of an accident are firmly fastened down. [. . . ] Do not replace the seat cover with one not recommended by the manufacturer because the cover is an integral part of the restraint. Bébé Confort products have been carefully designed and tested to ensure the complete safety and comfort of your baby. After having put your baby in the seat, ensure that the belt is correctly tensioned by pulling the strap. Before removal, ensure you have carefully noted the way which the various parts are attached to the seat so as to facilitate reassembly. Before cleaning check the label sewn into the fabric, you will find the wash symbols indicating the method of washing each item. Washing symbols : Machine wash 30 ° Hand wash only Do not use bleach (Chlorine) Shell: · Clean the shell using a damp cloth. Do not dry clean Do not tumble dry Do not iron CAUTION: before starting to fit the seat read through all the instructions provided. The blue marks on the Créatis indicate the path of the safety belt. 1 - Fasten the belt and place your Créatis facing backwards on the seat of the vehicle. 2' - Thread the lap belt through the lower slot in the shell and fasten it as shown. CAUTION: when passing the lap belt through the slot in the shell, always ensure that it is not twisted. 18 - Press on the right-hand locking knob until you hear a click, the button will then remain depressed. 20 - When you hear a click from the right-hand knob and when it has returned to its initial position, the handle is in the locked position. IMPORTANT : before carrying the seat, check that the carry handle is locked in place. 19 - Press on the left-hand side locking knob and, keeping it depressed, fold the handle towards you. Mosquito net: (sold as an accessory) 23 - Place the top of the mosquito net over the sunshade, attach it using the 2 press studs and then hook the elastic attachments under the front of the shell. 22 - The sunshade can be folded back to allow you to see the child better. Compatibility : Créatis can be used with the following Bébé Confort frames: Loola High Trek Trophy Trophy Air 4 Trophy Air 6 Elite Twin Club WARNING: Before removal, ensure you have carefully noted the way which the various parts are attached to the seat so as to facilitate reassembly. For washing, check the care label sewn into the fabric (see care chapter p 7). Cushion for the newborn 24 - After washing, wait until the inner foam is completely dry. Headrest 25 - Remove the head rest cover starting from the top, unhook the elastic attachments. WARNING: never remove the protective foam fixed to the plastic head rest. [. . . ] 28 - Remove the cover from the base of the seat and pass the buckle of the harness through the slot in the cover. 29 - Remove the cover from the top of the seat and unhook the elastic attachments from behind the polystyrene. Dear Customer, Thank you for the confidence you have shown us in choosing one of our products. This certificate indicates that this product has been manufactured according to the various applicable quality standards and that it has been subjected to numerous checks during the different manufacturing stages. [. . . ]