User manual BEGLEC 6 LIGHT V1.1

[. . . ] This product meets the requirements of the current European and national guidelines. This device has been designed to produce decorative effect lighting and is used in light show systems. Adjustable speed and music sensitivity Check that the available voltage is not higher than the one stated on the rear panel of the unit. [. . . ] Should there be any, do not use the device and consult your dealer first. â· Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. â· Keep this booklet in a safe place for future consultation. To protect the environment, please try to recycle the packing material as much as possible. â· A new light effect sometimes causes some unwanted smoke and/or smell. â· To prevent fire or shock hazard, do not expose this appliance to rain or moisture. â· To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. â· Don't place metal objects or spill liquid inside the unit. If a foreign object enters the unit, immediately disconnect the mains power. â· Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. â· Don't cover any ventilation openings as this may result in overheating. â· Prevent use in dusty environments and clean the unit regularly. â· Inexperienced persons should not operate this device. â· Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. â· Allow the device about 10 minutes to cool down before replacing the bulb or start servicing. [. . . ] â· In the event of serious operating problems, stop using the fixture and contact your dealer immediately. â· Important: Never look directly into the light source!Don't use the effect in the presence of persons suffering from epilepsy. [. . . ]