User manual BEGLEC BRITEQ PD-32A

[. . . ] The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. This symbol means: indoor use only This symbol means: Read instructions This symbol means: Safety Class I appliance The device is suitable for mounting on standard flammable surfaces. Standard flammable surfaces include building materials such as wood and wood-based materials more than 2mm thick. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. [. . . ] It must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard Never let the power-cord come into contact with other cables!This appliance must be earthed to in order comply with safety regulations. Always replace a damaged fuse with a fuse of the same type and electrical specifications!In the event of serious operating problems, stop using the appliance and contact your dealer immediately. Due to safety reasons it is prohibited to make unauthorized modifications to the unit. User manual Some important instructions: Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. To protect the environment, please try to recycle the packing material as much as possible. RESIDUAL CURRENT CIRCUIT BREAKER: this is a vital security device of the power distributor!When someone accidentally touches one of the mains conductors, a current leak through the body of this person could result in a lethal (deadly) shock. As soon as such current leakage in the installation is detected, the power distributor outputs will be disconnected. Under normal working conditions the lever on the right should be in upward position. Important: the functions of this device should be tested every 30days by pushing the test button on top: as a result the outputs should be immediately disconnected from the mains. INDIVIDUAL CIRCUIT BREAKERS: each of the 3 phases is secured by two C16 automatic circuit breakers. Under normal working conditions the lever should be in upward position. VOLT METERS: each of the 3 phases have their individual 3-digit voltage meter. AMPERE METERS: each of the 3 phases have their individual 3-digit ampere meter. 32A OUTPUT: CEE (3P+N+E) outlet socket (3x 32A, 5wire), can be used to feed-through up to 32A 3phase current. RESIDUAL CURRENT CIRCUIT BREAKER: this is a vital security device of the power distributor! [. . . ] The complete installation should be approved by an authorized expert before it will be taken into operation!Each change to an existing installation should be re-approved as well!PD-32A Power Input: Maximum overall power: Maximum power per phase: Maximum power per output: Protection class: Max. 680Watt (16A) class I (only to be connected to class I outlets) 30mA 2x C16 (In=16A, instantaneous tripping current = 5x In) 5x 6mm² (H07RN-F 5G6) 32A-wires: 10AWG (5, 2mm²) ­ 16A-wires: 14AWG (2, 1mm²) see drawings 7, 4 kg During inspection the following points should be checked: All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. [. . . ]