User manual BELSON C-28-1-4 TO C-28-1-8

[. . . ] TO USE: For a complete styling, hair should be clean, dry and free from dirt, hair spray, creams, etc. ) Rest the iron on its stand on a smooth , flat surface , and plug in. Then, select a temperature according to the type and texture of hair to be styled. [. . . ] Hold for less time if hair is easy to curl, or if you want loose curls or just waves. When ready to release curl, unwind about half a turn (for longer hair, unwind a bit more) and push down on the clamp release lever to open the clamp. Allow curl to cool, and try not to disturb curls while proceeding in the same manner around whole head. When completely finished, and all curls have cooled thoroughly, gently brush and comb hair into the style desired. STYLING TIP: For bouncy, flip-up curls, the clamp should be under and the barrel over the section of hair at the start of curl. For curl-under, page-boy styles, the clamp should be over and the barrel under the hair section at the start of curl. AUTO-OFF: After approximately one hour, the unit will automatically shut itself off. When traveling overseas, this product can be plugged into any voltage outlet without the user's having to adjust the product manually in any way. For use in some overseas countries, an attachment plug adapter of the proper configuration for the power supply receptacle may be required. This appliance requires little maintenance and contains no user serviceable parts. TO STORE: Unplug appliance and let it cool; store in its box or in a clean, dry place. Never wrap the cord around unit; this could cause the cord to wear prematurely and break. Do not put any stress on cord where it enters the handle, as it could cause cord to fray and possibly break. Never hang unit up by the power cord -- use the hanging ring provided. When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following: s READ ALL INSTRUCTIONS BEFORE USING. DANGER - As with most electrical appliances, electrical parts are electrically live even when the switch is off. [. . . ] Never wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and cause it to fray and break. dO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE , OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY. IMPORTANT: During the first few minutes of initial use, there may be a slight odor. [. . . ]