User manual BELSON MH2007

[. . . ] 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. This is where you will find the description of the controls and the internal parts. 14) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. 15) After loading the dishes, you need to select the right wash cycle and measure out the correct dose of detergent and rinse aid. [. . . ] Detergent and rinse aid Useful tips • Use the right amount of detergent: if you use too much, you will not get cleaner dishes, but just more environmental pollution. Check whether there is any detergent residue on the edges of the dispenser. • Keep your dishwasher detergent and rinse aid in a cool, dry place and away from children. The rinse aid container is situated on the inside of the appliance door; you should refill it when you see the container is empty by means of indicator light “D”. (If your dishwasher is fitted with a “low rinse aid” indicator light, fill the container up when the indicator light flashes or lights up). You can adapt the amount of rinse aid used by the dishwasher: regulate the adjuster F which you will find under lid C. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting. Warning Three-in-one dishwasher tablets are now available on the market, and combine the detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the appliance interior. Add rinse aid to the corresponding container only if you are dissatisfied with the results on your dishes. S For particularly delicate dishes, we recommend you use the specific wash cycle offered by your dishwasher. 18 ARISTON DISHWASHER - Instructions for installation and use After having bought or moved your dishwasher to another home, a correct installation ensures that your dishwasher will operate smoothly and efficiently. Choose where you want to install let the water run to make sure it is your dishwasher, you can even clear and free of impurities before place it so that its sides or back making the connection. If this panel are side by side with furniture precaution is not taken, the water or up against the wall. The inlet could get blocked, causing dishwasher is provided with water damage to your dishwasher. Supply and drain hoses, which can be directed towards the left or right Hot water connection. Your dishwasher can be supplied with hot water from the mains Levelling. Supply (if you have a central heating Once the appliance is positioned, system with radiators) at a tempeadjust the feet by screwing them rature of no more than 60°C. In or out depending on how high In this case, the wash cycle time you want it and to level it so that it will be about 15 minutes shorter is horizontal. Make sure that it is and the wash will be slightly less not inclined more than 2 degrees. If the appliance is level, it will help The connection must be made to ensure its correct operation. [. . . ] The food particles are removed from the wash water, allowing it to be recirculated during the cycle, filtered perfectly. For this reason, it is a good idea to remove the larger food particles trapped inside the semi-circular filter A and cup “C”after each wash; to remove the filter assembly, pull the cup handle upwards. The entire filter assembly should be cleaned thoroughly once a month: semi-circular filter A + cup C + cylindrical filter B+ microfilter D. D Care and maintenance D ISHWASHER Once in a while, once a month, spend a little time on the filter assembly and the sprayer arms. [. . . ]