User manual BLACK & DECKER GT4245

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BLACK & DECKER GT4245. We hope that this BLACK & DECKER GT4245 user guide will be useful to you.


BLACK & DECKER GT4245 : Download the complete user guide (3793 Ko)

Manual abstract: user guide BLACK & DECKER GT4245

Detailed instructions for use are in the User's Guide.

[. . . ] Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] These include: u Injuries caused by touching any rotating/moving parts. When using any tool for prolonged periods ensure you take regular breaks. 5 ENGLISH u (Original instructions) Electrical safety Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF. ) Vibration # The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure. The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. Always check that the power supply corresponds to the voltage on the rating plate. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. U When using the tool outdoors, only use extension cables intended for outdoor use. A suitable rated Black & Decker extension cable of up to 30 m can be used without loss of power. U Electric safety can be further improved by using a highsensitivity 30 mA residual current device (RCD). U Features This tool includes some or all of the following features. Cable restraint Labels on tool The following pictograms are shown on the tool: : Assembly O E Warning!To reduce the risk of injury, the user must read the instruction manual. Before assembly, make sure that the tool is switched off and unplugged and that the blade sheath is fitted over the blades. A & B) u N R 96 6 Wear safety glasses or goggles when operating this tool. C) Immediately disconnect the cable from the mains if it is damaged or cut. Unless the tool is fitted with a mains cable, you will need to connect an extension cable to the power inlet. U Connect the female socket of a suitable extension cable to the power inlet of the tool. U Loop the cable through the cable restraint (6) as shown to prevent the extension cable from becoming detached during use. Trim conifers and other fast growing shrubs every six weeks from May until October. [. . . ] Uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www. Uk % GT4245 / GT4550 Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-15 2000/14/EC, Hedge trimmer 1960 min-1, Annex V Measured sound power (LpA) 93 dB(A) Uncertainty (K) 3 dB(A) Guaranteed sound power (LpA) 96 dB(A) Uncertainty (K) 3 dB(A) These products also comply with directive 2004/108/EC and 2011/65/EU. For more information, please contact Black & Decker at the following address or refer to the back of the manual. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLACK & DECKER GT4245




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLACK & DECKER GT4245 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.