User manual BMW SERIE 3 CONVERTIBLE 2000

[. . . ] With a quick reference guide for your convenience. Online Edition for Part No. 01 41 0 155 048 - © 01/00 BMW AG 323Ci Online Edition for Part No. 01 41 0 155 048 - © 01/00 BMW AG Congratulations, and thank you for choosing a BMW. Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. [. . . ] The BMW Universal Transmitter recognizes and "learns" the transmitted signal of each of the original hand-held transmitters. The signal of an original hand-held transmitter can be programmed on one of the three channel keys. Following that, each of the devices can be actuated with the appropriately programmed channel key. If the vehicle is sold, the memory of the channel keys should be cleared as described on page 102. During programming and before every remote actuation of a programmed device by the BMW Universal Transmitter, check to be sure that there are no persons, animals or objects within the actuation range of the device in order to prevent possible injuries or damage. Also, comply with the safety precautions of the original hand-held transmitter. < Checking for the conversion code To determine whether the original hand-held transmitter has a conversion-code system, you may either read the instructions for the original handheld transmitter or program a channel key as described on the next page (lefthand column under "Programming"). Then press and hold the programmed channel key of the BMW Universal Transmitter. If the indicator lamp of the BMW Universal Transmitter flashes for two seconds and then stays on steadily, the original hand-held transmitter is equipped with a conversioncode system. Using the conversioncode system, program the channel keys as described on the next page (righthand column under "Programming a hand-held transmitter using conversion code"). If you have additional questions, please consult your BMW center or call 1-800-355-3515. You can also visit this website: www. bmwusa. com. < Original hand-held transmitter If this symbol is present on the packaging or in the instructions of the original hand-held transmitter, it may be assumed that this hand-held transmitter is compatible with the BMW Universal Transmitter. Online Edition for Part No. 01 41 0 155 048 - © 01/00 BMW AG BMW Universal Transmitter* 101n Read and comply with the safety precautions on previous page. < When programming the BMW Universal Transmitter, consult the instructions for the specific device. For using the BMW Universal Transmitter with a conversion-code system, note the following supplemental programming instructions: 46cus023 46cus024 Programming 1 Channel keys 2 Indicator lamp Read and comply with the safety precautions on the previous page. < 1 Turn the ignition key to position 2 2 To initialize: press and hold both outside keys 1 until the indicator lamp 2 flashes, and then release them. The three channel keys are cleared 3 Hold the original hand-held transmitter to the receiver embedded in the A second person facilitates promirror, e. g. right near the buttons, no gramming of the BMW Universal further than 2 inches away (5 cm) Transmitter. < 4 Press the transmission key of the original hand-held transmitter (arrow 2) 1 Program the BMW Universal Transand the desired channel key of the mitter as described previously under Integrated Universal Remote Control "Programming" (arrow 1) simultaneously. Release 2 Press and hold the programming key both keys as soon as the indicator on the receiver of the device for aplamp flashes rapidly proximately two seconds until the 5 To program other original hand-held programming lamp on the device transmitters, repeat steps 3 and 4. comes on The corresponding channel key is now 3 Press the desired channel key of the programmed using the signal from the BMW Universal Transmitter three original hand-held transmitter. 01 41 0 155 048 - © 01/00 BMW AG Index If you have additional questions, please consult your BMW center. < Data Technology Repairs Car care Controls Overview Programming a hand-held transmitter with conversion code 102nBMW Universal Transmitter* User information Do not use this BMW Universal Transmitter with any garage door opener that lacks safety "stop" and "reverse" features as required by federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). Operation is subject to the following two conditions: as defined in the regulations, this device must not emit harmful interference, and must be shielded against interference from external sources to prevent unauthorized or inadvertent activation. Storage compartments Clearing the channel keys Read and comply with the safety precautions on page 100. < The memory of individual channel keys cannot be deleted. However, the three channel keys can be cleared together as follows: > Press and hold both outside keys of the BMW Universal Transmitter until the indicator lamp flashes, and then release them. All of the channel keys are cleared. Open the storage compartment in the front center armrest: press the button (arrow) and lift upward. You will find additional storage compartments in the doors and in the center console above the ashtray. [. . . ] 01 41 0 155 048 - © 01/00 BMW AG 181n Engine data 182 Dimensions 183 Weights 184 Capacities 185 Electrical system 186 Drive belts 186 Owner service procedures Repairs Technical data Data Index Index Data Online Edition for Part No. 01 41 0 155 048 - © 01/00 BMW AG Technology Advanced technology Car care Operation, care and maintenance Controls Controls and features Overview Overview 182nEngine data BMW 323Ci Displacement Number of cylinders Maximum output at engine speed Maximum torque at engine speed Compression ratio Stroke Bore Fuel-injection system cu. (cmm) hp (kW) rpm lb. ft (Nm) rpm e in (mm) in (mm) 152. 2 (2, 494) 6 170 (127) 5, 500 181 (245) 3, 500 10. 5 2. 95 (75) 3. 31 (84) Digital electronic engine-management system Online Edition for Part No. 01 41 0 155 048 - © 01/00 BMW AG Dimensions 183n 46use019 Minimum turning circle dia. : 34. 4 feet (10. 5 m). Online Edition for Part No. [. . . ]