User manual BOMANN GS 7317 IX

[. . . ] For safety reasons, alterations or modifications of the appliance are prohibited. To ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc. This unit is intended to be used in household and similar applications such as - staff kitchen areas in shops, offices and other working environments; - farm houses and by clients in hotels, motels and other residential type environments; Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not use mechanical devices or other means to accelerate the defrosting process (if necessary), except those described in this manual (depending on the model included the scope of delivery). [. . . ] Connect the mains cable to a properly installed and earthed wall outlet. If the plug after installation is not accessible, a corresponding disconnect device must be available to meet the relevant safety regulations. Reversing the door opening If required, the door opening can be moved from the right (supplied condition) to the left side. WARNING: When replacing the door stop, the appliance must be disconnected from the power supply first. You possibly need: screw wrench, Phillips screw- Keep the parts to be replaced for another possible door stop change. Move and fasten the upper door hinge to the opposite appliance side after unscrewing the hinge pin and inserting it from the other hinge side. Check that the door is optimally aligned both vertically and horizontally to ensure smooth opening and closing of the door. Dismount the door handle and attach it to the corresponding other door outer side. Transfer the cover caps on the exposed holes to the respective other door outer side. Dismount the upper door hinge and lift out the Transfer the doorstop on the door underside. CAUTION: After transport, the appliance should be left standing upright for four hours before connecting to the power supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance breakdown. Consider the instructions which we provide in the chapter "Cleaning and Maintenance". Operate the temperature control with the help of the included plastic plate. settings The power levels [ MID ­ MAX ] regulate the different values of the internal temperature. Setting MID: Lowest setting (warmest inside temperature) Setting NORMAL: Medium setting (optimal operating temperature) Setting MAX: Highest setting (coldest inside temperature) Note that the temperature will change depending on the ambient temperature, frequency of door opening and the amount of food in the appliance. During initial operation, turn the temperature control to the highest setting first, until the appliance has reached the desired operating temperature. Afterwards it is recommended to turn the control back to a medium setting; correcting the temperature at a later point would then be easier. To guarantee that the temperature is low enough, you should pre-cool the appliance a few times before initial loading foods. CAUTION: Always pay attention to the storage instructions on the sales packaging. The 4-star freezer allows you to store frozen food at a temperature of -18°C for several months; to produce ice cubes and to freeze fresh food. To avoid contamination of food, respect the following instructions: · Opening the door for long periods can cause a Significant increase of the temperature in the compartments of the appliance. [. . . ] This helps avoid the potential effects of incorrect disposal on the environment and human health. This will contribute to the recycling and other forms of reutilization of electrical and electronic equipment. Information concerning where these can be disposed of can be obtained from your local authority. WARNING: Remove or disable any existing snap and bolt locks, if you take the unit out of operation or dispose it. [. . . ]