User manual BOMANN GS 7326

[. . . ] To ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc. The appliance is designed exclusively for private use and for the envisaged purpose. Do not use the appliance for any Special safety Information for this Unit ?This unit is intended to be used in household and similar applications such as - staff kitchen areas in shops, offices and other working environments; - farm houses and by clients in hotels, motels and other residential type environments; - bed and breakfast type environments; - catering and similar non-retail applications. [. . . ] Make sure that the voltage supply matches the specifications on the rating label before connecting. Connect the mains cable to a properly installed and earthed wall outlet. If the plug after installation is not accessible, a corresponding disconnect device must be available to meet the relevant safety regulations. Reversing the door opening If required, the door opening can be moved from the right (supplied condition) to the left side. WARNING: When replacing the door stop, the appliance must be disconnected from the power supply first. You possibly need: screw wrench, Phillips screw- Keep the parts to be replaced for another possible door stop change. Dismount the upper door hinge and lift out the Transfer the doorstop on the door underside. Move and fasten the upper door hinge to the opposite appliance side after unscrewing the hinge pin and inserting it from the other hinge side. Check that the door is optimally aligned both vertically and horizontally to ensure smooth opening and closing of the door. Dismount the door handle and attach it to the corresponding other door outer side. Transfer the cover caps on the exposed holes to the respective other door outer side. CAUTION: After transport, the appliance should be left standing upright for four hours before connecting to the power supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance breakdown. Consider the instructions which we provide in the chapter "Cleaning and Maintenance". Super freeze function Keep pressing the SUPER FREEZE 3" button for approx. If the function is activated the display shows [-24] and the symbol lights. When the super freezing function is activated, the device operates at maximum power to speed up the freezing process. The super freezing function shuts off automatically after about 52 hours. The function can be ended at any time before the switch-off time has expired. Alarm function As soon as the freezer door remains open for more than one minute, an acoustic signal sound. Press the ALARM button or close the appliance door to stop the signal tone. Temperature adjustment Press the TEMP°C button several times to set the desired inside temperature in the range from -14°C to -24°C. [. . . ] If the appliance is out of use for long periods: Leave open the appliance door to avoid formation Disconnect the appliance from the power supply, if it isn't in use. Do not install the appliance near stoves, heaters or other heat sources. Information concerning where these can be disposed of can be obtained from your local authority. WARNING: Remove or disable any existing snap and bolt locks, if you take the unit out of operation or dispose it. [. . . ]