User manual BOSCH PRIVATE COLLECTION TKA6003V

[. . . ] Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. D) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. [. . . ] Penetration of water into the machine increases the risk of an electric shock. , when sparks emit from sanding metals, sanding debris in the dust bag, micro filter or paper sack (or in the filter sack or filter of the vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or other chemical materials and when the sanding debris is hot after long periods of working. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. ) as well as during its transport and storage, lock the On/Off switch in the off position. There is danger of injury when the On/Off switch is unintentionally actuated. In case of damage and improper use of the battery, vapours may be emitted. When the battery is defective, liquid can escape and come into contact with adjacent components. The heating of the battery charger during the charging process can pose a fire hazard. Children should be supervised to ensure that they do not play with the battery charger. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). The charging procedure begins as soon as the mains plug of the battery charger is plugged into a socket. During the charging procedure, the 3 LEDs light up one after the other and briefly go out. Disconnect the battery charger from the mains supply when not using it for longer periods. ) as well as during its transport and storage, lock the On/Off switch in the off position. There is danger of injury when the On/Off switch is unintentionally actuated. The voltage of the power supply must correspond with the data given on the nameplate of the battery charger. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. The lithium ion battery can be charged at any time without reducing its service life. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates. Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one's health. Touching or breathing-in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders. [. . . ] Therefore, the battery is not subject to national or international regulations pertaining to dangerous mediums, neither as an individual component nor when inserted into a machine. However, the regulations governing dangerous goods may be relevant when transporting several batteries. In this case, it can be necessary to comply with special conditions (e. For more information, please refer to the instruction sheet (in English) under the following Internet address: http://purchasing. [. . . ]