User manual BOSCH PSB 700 RE

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] The tool insert can jam and lead to loss of control over the power tool. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1 Keyless chuck 2 Spindle lock button 3 "Drilling/Impact Drilling" selector switch 4 Lock-on button for On/Off switch 5 On/Off switch 6 Thumbwheel for speed preselection 7 Rotational direction switch 8 Button for depth stop adjustment 9 Wing bolt for adjustment of auxiliary handle 10 Auxiliary handle* 11 Depth stop* 12 Chuck key* 13 Key chuck* 14 Allen key** The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting. Impact Drill Article number Rated power input Output power No-load speed Impact rate Rated torque Spindle lock Spindle collar dia. ­ Concrete ­ Steel ­ Wood Chuck clamping range Weight according to EPTA-Procedure 01/2003 Protection class mm mm mm mm mm kg 43 16 12 30 1. For lower voltage and models for specific countries, these values can vary. Typically the A-weighted noise levels of the product are: Sound pressure level 100 dB(A); Sound power level 111 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah = 4. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. The auxiliary handle 10 can be set to any position for a secure and low-fatigue working posture. turn the wing bolt for adjustment of the auxiliary handle 9 in anticlockwise direction and set the auxiliary handle 10 to the required position. Adjusting the Drilling Depth The required drilling depth X can be set with the depth stop 11. press the button for the depth stop adjustment 8 and insert the depth stop into the auxiliary handle 10. Pull out the depth stop until the distance between the tip of the drill bit and the tip of the depth stop correspond with the desired drilling depth X. [. . . ] Com Our customer consultants answer your questions concerning best buy, application and adjustment of products and accessories. Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Nedan använt begrepp "Elverktyg" hänför sig till nätdrivna elverktyg (med nätsladd) och till batteridrivna elverktyg (sladdlösa). [. . . ]