User manual BRANDT FC1141B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BRANDT FC1141B. We hope that this BRANDT FC1141B user guide will be useful to you.


BRANDT FC1141B : Download the complete user guide (1255 Ko)

Manual abstract: user guide BRANDT FC1141B

Detailed instructions for use are in the User's Guide.

[. . . ] €¢ The electrical installation must be dimensioned for the maximum power indicated on the reference plate and the electrical socket must have a regulatory earth connection. €¢ The mains circuit supplying the oven must have a single-pole cut-off switch with at least 3 mm between contacts. €¢ If the power cord is damaged, it must be replaced by the aftersales technical service or by similarly qualified staff, to avoid hazard. €¢ Ensure the appliance is unplugged from the mains before replacing the oven lamp, to avoid electric shock. [. . . ] When it has cooled down, pre-clean it by wiping the inside with a damp cloth. If the item to be roasted is too large, place tray on the base of the oven. Insert the spit in the item you wish to roast and hold it in place using the two sliding hooks (2. Insert the spit in the hole in the rear wall of the oven and unscrew the handle of the spit so that you can close the door (2. Select the ventilated grill with rotary spit programme and switch on the oven. When roasting is complete, screw the spit handle back on and take it out of the oven. Choose the accessory or accessories to be used and their recommended position, Installation 1. The appliance must be connected to the mains with a fixed single-phase connection with the neutral-to-neutral (blue) connection guaranteed (1. The time will automatically be validated after 3 seconds, or if you press either the or button. 8 Selecting the cooking function the function selector and select the desired function according to the model (2. Several dishes may be cooked at once without their flavours or smells mixing. This function provides power savings of 25% while maintaining the cooking properties. When you select the cooking function, the oven will recommend the optimum temperature and cooking will begin immediately. You can change this temperature within an upper and lower limit according to the programme selected. The temperature will flash and can be changed using the “ “ control. In all cases, when the cooking process is complete, turn the function selector dial to (2. After a few seconds the time will automatically be validated and the countdown will begin. 12 Selecting the end time : Select the cooking function, the temperature and the cooking time. The start of cooking will be delayed so that it finishes at the time shown. If you prefer the oven to function without a time limit, turn it to hand position . [. . . ] For long cooking times, switch off the oven 5 or 10 minutes before the end of cooking time. Indicates that the appliance must The symbol not be disposed of in traditional bins for domestic waste. Recycling domestic appliances will prevent negative consequences for health and the environment and will allow savings on energy and resources. For further information, contact the local authorities or the shop where you bought the oven. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BRANDT FC1141B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BRANDT FC1141B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.