User manual BREVILLE BBL550XL

[. . . ] ⷠDisconnect the blender from the power outlet before removing pitcher from base. To reduce risk of injury, never place blade assembly on base without jar properly attached. ⷠDo not use this blender for any purpose other than food or beverage preparation. ⷠDo not blend a dry, thick or heavy mixture for more than 10 seconds without turning the blender off. [. . . ] Select the required speed (1 to 4) by pressing the corresponding speed button. Operate the blender only for the appropriate amount of time required ­ do not over process. This is a preprogrammed cycle which automatically adjust the blending time and speeds to optimize blending results. When the programmed cycle has finished, the blender will automatically cease to operate and the function button and `Stop' button illumination will go out. At the end of use, always make sure the Breville Hemisphere Blender is turned off by pressing the `Power' button on the control panel. Make sure the motor and blades have completely stopped before attempting to move the appliance, or when the Breville Hemisphere Blender is not in use and before disassembling, cleaning and storing. the Breville ikon Hemisphere Blender features a motor overload protection feature. If the motor is being overloaded, the motor will stop and the function key LED's will illuminate and flash. To restart it again, unplug from the mains and let it cool down for 30 minutes or longer. ⷠDuring the blending process, ingredients may stick to the sides of the blender pitcher. To push the food back onto the blades, press the `Power' button on the control panel and remove the power cord. Remove the lid and use a plastic spatula to scrape down the sides of the pitcher. If any moisture or liquid appears on top of the motor base during blending, press the `Power' button on the control panel, switch off at the power outlet and remove the power plug. Wipe the motor base immediately with a dry cloth or paper towel to absorb the liquid. Always make sure the Breville Hemisphere Blender is off by pressing the `Power' button on the control panel. Remove the blade assembly by upturning the blender jug and twisting the Blade Removal System clockwise, (see fig 1) then lift upwards and away from the base of the blender. Remove the silicon seal from the blade assembly The Breville Hemisphere Blender features a one piece Blade Removal System for the easy removal of the blade and jug for cleaning. Do not use abrasive souring pads or cleaners when cleaning the motor base as they may scratch the surface. Strong smelling foods such as garlic, fish and some vegetables such as carrots may leave an odor or stain on the blender pitcher and lid. to remove , soak blender pitcher and lid for 5 minutes in warm soapy water. Then wash with a mild detergent and warm water, rinse well and dry thoroughly. Turn the blender pitcher over and insert the blade assembly housing into the pitcher base (see Fig 2). [. . . ] Breville®* warrants this Breville® appliance against defects that are due to faulty material or workmanship for a period of (1) year from the date cited on the original purchase receipt This warranty does not cover damage from abuse, neglect, use for commercial purposes, or any other use not found in the printed "Instructions for use" booklet. Should the consumer choose to tamper with, or intentionally dismantle the product, the Warranty will automatically be deemed void. There is no warranty for glass parts, glass containers, filter basket, blades and agitators. HWI Breville® expressly disclaim all responsibility for consequential damages for incidental losses caused by use of this appliance. [. . . ]