User manual CANDY CMB97SLX WIFI

[. . . ] H) Young children should be supervised to ensure they do not play with the appliance. I) There shall be adequate ventilation of the room when the rangehood is used at the same time as appliances burning gas or other fuels. L) There is a risk of fire if cleaning is not carried out in accordance with the instructions. This appliance conforms to the European Directive EC/2002/96, Waste Electrical and Electronic Equipment (WEEE). [. . . ] - In the case of assembly of the appliance in the suction version prepare the hole for evacuation of the air. € We recommend the use of an air exhaust tube which has the same diameter as the air exhaust outlet hole. If a pipe with a smaller diameter is used, the efficiency of the product may be reduced and its operation may become noisier. € Fixing to the wall: - Drill the holes A respecting the distances indicated (Fig. - Fix the appliance to the wall and align it in horizontal position to the wall units. - When the appliance has been adjusted, definitely fix the hood using the screws A (Fig. For the various installations use screws and screw anchors suited to the type of wall (e. If the screws and screw anchors are provided with the product, check that they are suitable for the type of wall on which the hood is to be fixed. € Fixing the decorative telescopic flue: - Arrange the electrical power supply within the dimensions of the decorative flue. If your appliance is to be installed in the ducting version or in the version with external motor, prepare the air exhaust opening. 3) in such a way that it is in line with your hood and respecting the distance from the ceiling indicated in Fig. The prolonged use of the lighting system significantly decreases the average duration of the bulbs. € If the appliance is equipped with courtesy lights it is possible to use them for general room lighting for a prolonged amount of time. € Attention: the non compliance with the hood cleaning warnings and with the replacement and cleaning of the filters entails risk of fires. 8): In order to replace the dichroic lamps, carefully remove the lamp from the lamp holder with the help of a small flat screwdriver or a similar tool. 9): To replace the halogen light bulbs B, remove the glass pane C using a lever action on the relevant cracks. 10): If the appliance version is with LED lamps, the intervention of a specialised technician is necessary to replace them. The “filter alarm” can be reset by pressing the button for a few seconds. Button B = Switches the appliance on/Decreases the extraction rate of the motor. Automatic extraction function: With this function the appliance automatically adjusts the motor’s extraction rate according to the quality of the air below thanks to the sensor located under the cooker hood (Fig. To activate this function, press the “B” button for a few seconds. When the hood is switched on, before automatic suction is enabled, you must wait a period of time depending on the sensor's type of setting. [. . . ] Carbon filter: Carbon filters are used to purify the air which is released back into the room. The filters are not washable or re-usable and must be replaced at least once every four months. Saturation levels of carbon filters depend on the frequency with which the appliance is used, the type of cooking performed and how often the anti-grease filters are cleaned. To activate the filter alarm function, press the “A+E“ buttons together. [. . . ]