User manual CANON COLOR IMAGECLASS MF8280CW BROCHURE

[. . . ] - Example of Functional Execution Command: “CF_BRIGHT_032” [CR] - Example of Status Read Command: “CR_BRIGHT” [CR] Note) “_” means a space ・ When it takes more than a second to receive a single command, it is not executed. When it takes more than a second to receive carriage return (0x0D) since the reception of the first data “C”, it clears the information of the receive buffer. ・ When the command pipelining, allow the interval time of no less than100ms after receiving return value. Command PC → Projector Projector → PC “CF_BRIGHT_032” CR “000” CR (No less than 100 ms) Next command Return Value ( A few ms - 5s) ・ Do not send another command before the reception of the return value; the operation by the command is not ensured. [. . . ] Acceptable Unacceptable “000” [CR] “Error Code” [CR] Response 30/72 COLOR IMAGECLASS MF8280CW Expand Serial Command Functional Specifications 8. 7 Screen Control Command 8. 7. 1 CF_SCREEN Command Command “CF_SCREEN_%1” [CR] “NORMAL” ---------------------- Select Normal mode “WIDE” --------------------------- Select Wide mode “TRUE” -------------------------- Select True mode “FULL” --------------------------- Select Full screen mode “CUSTOM” ---------------------- Select Custom mode “DZOOM_UP” ----------------- Scale up with Digital zoom “DZOOM_DN” ---------------- Scale down with Digital zoom “UP” --------------- Select aspect screen size with forward switching in possible range “DN” --------------Select aspect size with backward switching in possible range “NORMAL” ---------------------- Select Normal mode “WIDE” --------------------------- Select Wide mode “UP” ------------------- Select aspect size with forward switching in possible range “DN” --------------------- Select aspect size with backward switching in possible range “RST” ---------------------- Reset Aspect adjustment Input is Computer %1 Input is Video Common in AV/PC Details Select aspect size (Available only in the normal Power ON status) When selected input does not include specified %1, error code “101” [CR] is returned and it is not executed. Receiving “DZOOM_UP” or “DZOOM_DN” command immediately executes the function. Acceptable Unacceptable “000” [CR] “Error Code” [CR] Response 8. 7. 2 CF_DZCENT Command Command %1 Details “CF_DZCENT_%1” [CR] “CENT” --------------- Cancel Digital Zoom (CENT: “CENTER”) Cancel Digital Zoom (Available only in the normal Power ON status and Input for Computer is selected) Release the image setting in case the image is enlarged or reduced. Acceptable Unacceptable “000” [CR] “101” [CR] ----------------- When input is Video Response 31/72 COLOR IMAGECLASS MF8280CW Expand Serial Command Functional Specifications 8. 7. 3 CF_KEYSTONE Command Command “CF_KEYSTONE _%1” [CR] “UP” ------------- Correct Keystone distortion to reduce upper part of image “FUP” ----------- Correct Keystone distortion to reduce upper part by 2 steps “DN” ------------- Correct Keystone distortion to reduce lower part of image “FDN” ----------- Correct Keystone distortion to reduce lower part by 2 steps “LEFT” ---------- Correct Keystone distortion to reduce left part of image “FLFT” ---------- Correct Keystone distortion to reduce left part by 2 steps “RIGHT” -------- Correct Keystone distortion to reduce right part of image “FRGT” --------- Correct Keystone distortion to reduce right part by 2 steps “RST” ------------ Set Keystone OFF Change level of Keystone distortion correction (Available only in the normal Power ON status). When reached the limit of the correction level, projector accepts the command but does not execute it. When trying to set the value beyond available range, error code “201” is returned and the operation is not executed. Example 1: When the correction level of the right part has reached its upper limit and then the command “RIGHT” is received Example 2: When the upper part correction allows only another step, and then the command “FUP” is received. Acceptable Unacceptable “000” [CR] “Error Code” [CR] %1 Details Response 8. 7. 4 CF_KYSTONMODE Command Command %1 Details Response “CF_KYSTNMODE _%1” [CR] “STR” --------- Set Keystone store mode to Store “RST” --------- Set Keystone store mode to Reset Set Keystone store mode (Available only in the normal Power ON status) Acceptable Unacceptable “000” [CR] “Error Code” [CR] 8. 7. 5 CF_CEIL Command Command %1 “CF_CEIL_%1” [CR] “ON” --------------------------- Set Ceiling to ON. Set/Cancel Ceiling mode. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Unacceptable “000” [CR] “Error Code” [CR] Details Response 8. 7. 6 CF_REAR Command Command %1 “CF_REAR_%1” [CR] “ON” --------------------------- Set Rear to ON. Set/Cancel Rear mode (Available only in the normal Power ON status) When Rear is ON, projected image is left/right reversed. Acceptable Unacceptable “000” [CR] “Error Code” [CR] %1 Details Response 37/72 COLOR IMAGECLASS MF8280CW Expand Serial Command Functional Specifications 8. 10. 4 CF_LOGO Command Command %1 “CF_LOGO_%1_%2” [CR] “0000 – 9999” ------------- Directly set Logo PIN code “OFF” ---------------------------Cancel Logo display “DFLT” ------------------------- Select Logo of Factory Default “USER” ------------------------ Select User “UP” ---------------------------- Select functions to choose forward (OFF → DFLT → USER → OFF → --) “DN” ---------------------------- Select functions to choose backward (OFF → USER → DFLT → OFF → --) Set Logo mode. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. When Logo Lock is enabled: PIN code is matched ------------------------- Command is valid (Acceptable) PIN code is mismatched-------------------- Command is invalid (Error code “102”) PIN code is beyond %1 available range -------Command is invalid (Error code”?”) When Logo Lock is disabled: PIN code is within %1 available range ------- Command is valid (Acceptable) PIN code is out of %1 available range ------- Command is invalid (Error code “?”) Note: When Logo Lock is enabled, matching Logo PIN code switches Logo but Logo Lock is not cancelled (Lock status is kept). *When ％2=”USER” is received, error code “101” is returned, in the case of Capture non-practice. Acceptable Unacceptable “000” [CR] “Error Code” [CR] %2 Details Response 8. 10. 5 CF_FILH Command Command %1 Details Response “CF_FILH_%1” [CR] “RST” ---------------------- Reset Filter used time Reset used time for filter of projector Acceptable Unacceptable “000” [CR] “Error Code” [CR] 8. 10. 6 CF_FILTIMER Command Command “CF_FILTIMER_%1” [CR] “0400” ---------------------- Set 400 hours “0700” ---------------------- Set 700 hours “1000” ---------------------- Set 1000 hours “OFF” ---------------------- Set Off(Do not warning display) Set time to display Filter cleaning / replacement warning on screen Acceptable Unacceptable “000” [CR] “Error Code” [CR] %1 Details Response 8. 10. 7 CF_FILCTL Command Command %1 Details Response “CF_FILCTL_%1” [CR] “ROLL” ---------------------- Execute operation of scroll of filter Execute operation of scroll of filter Acceptable Unacceptable “000” [CR] “Error Code” [CR] 38/72 COLOR IMAGECLASS MF8280CW Expand Serial Command Functional Specifications 8. 10. 8 CF_FILSCRL Command Command %1 Details Response “CF_FILSCRL_%1” [CR] “RST” ---------------------- Reset Filter scroll counter Reset Filter scroll counter Acceptable Unacceptable “000” [CR] “Error Code” [CR] 8. 10. 9 CF_FANSPEED Command Command %1 “CF_FANSPEED_%1” [CR] “MAX” ------------------------------ Select maximum fan speed “NOR” ------------------------------ Select normal fan speed Switch Fan Control Speed mode. (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Unacceptable “000” [CR] “Error Code” [CR] Details Response 8. 10. 10 CF_RCODE Command Command “CF_RCODE_%1” [CR] “001” ------------------------------------ Select Code 1 “002” ------------------------------------ Select Code 2 “003” ------------------------------------ Select Code 3 “004” ------------------------------------ Select Code 4 “005” ------------------------------------ Select Code 5 “006” ------------------------------------ Select Code 6 “007” ------------------------------------ Select Code 7 “008” ------------------------------------ Select Code 8 “UP” ---------- Switch forward (Code1→Code2→Code3 - - - →Code8→Code1) “DN” --------- Switch backward (Code8→Code7→Code6 - - -→Code1→Code8) Select Code of Remote Control (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Unacceptable “000” [CR] “Error Code” [CR] %1 Details Response 8. 10. 11 CF_RSENS Command Command “CF_RSENS_%1” [CR] “BOTH” -------------------------------- Select both front and back receiver of projector “FRONT” ---------------------------- Select only front receiver of projector “BACK” ------------------------------------ Select only back receiver of projector “UP” --------- Switch forward (BOTH → FRONT → BACK → BOTH) “DN” --------- Switch backward (BACK → FRONT → BOTH → BACK) Select location of infrared remote receiver of remote control (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Unacceptable “000” [CR] “Error Code” [CR] %1 Details Response 39/72 COLOR IMAGECLASS MF8280CW Expand Serial Command Functional Specifications 8. 10. 12 CF_P-MANE Command Command “CF_P-MANE_%1” [CR] “OFF” ---------------------------------- Set Power Management to Off “READY” ----------------------------- Set Power Management to Ready “SHUTDOWN” --------------------- Set Power Management to Shut Down mode “UP” ----------------------- Switch forward (Off→Ready→Shut down→Off) “DN” ---------------------- Switch backward (Off→Shut down→Ready→Off) Set/Cancel Power Management (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Unacceptable “000” [CR] “Error Code” [CR] %1 Details Response 8. 10. 13 CF_P-MANETIME Command Command “CF_P-MANETIME_%1” [CR] “01” - ”30” ----------------------- Directly specify setting time by the minute “UP” ------------------------------- Increment value by 1 (Switched in 01→02→ --- → 30 → 01 order) “DN” ------------------------------ Decrement value by 1 (Switched in 30→29→ --- → 01 → 30 order) Set time of Power Management time (Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Unacceptable “000” [CR] “Error Code” [CR] %1 Details Response 8. 10. 14 CF_ON-STA Command Command “CF_ON-STA_%1” [CR] “ON” --------------------------- Set Power On Start to ON. “OFF” ------------------------- Set Power On Start to OFF. “UP” ---------- Toggle between ON and OFF. (On→Off→On → - - -) “DN” --------- Toggle between ON and OFF. (On→Off→On → - - -) *”UP” and “DN” are exactly same operation. [. . . ] Acceptable “000_%1_%2_%3” [CR] %1 ------------------ Sensor 1 temp. When the temperature goes under 0, the first character is “-”, not a space, as in “-05. 5F”. With more than one temperature sensors installed, projector returns responses in a row. “_31. 5F _ _35. 2S _ _38. 0W ” [CR] The first data indicates sensor 1 data, then one space, and sensor 2 data. [. . . ]