User manual CHAMBERLAIN 600152

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CHAMBERLAIN 600152. We hope that this CHAMBERLAIN 600152 user guide will be useful to you.


CHAMBERLAIN 600152 : Download the complete user guide (798 Ko)

Manual abstract: user guide CHAMBERLAIN 600152

Detailed instructions for use are in the User's Guide.

[. . . ] Any control board with a normal close release function (NO) is able to operate with the signal now. [. . . ] The size of some doors is the factor which determines which profile size/height is required. Use a special tool for cutting PVC pipe or rubber hoses, a pair of pliers, a fine cutting saw or a sharp knife may also be used. When using the closing cap with sealing lip, the cut must be 12 mm away from the profile's base. The cut must be made carefully to ensure that the profile base is completely trimmed off, leaving a flush surface. When making a cable connection, select the required cable exit and remove the plug from the grommet with a hole punch or screwdriver. Then apply cyanacrylate adhesive evenly on the roughened surface of the profile and immediately place the closing cap carefully on the profile and apply pressure for about 10 sec. [. . . ] To ensure complete seal, apply Cyanacrylat adhesive on the Contact Duo-Profile around the grommet. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CHAMBERLAIN 600152




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CHAMBERLAIN 600152 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.