User manual CHAMBERLAIN 752E

[. . . ] Activate the opener only when door is in full view, free of obstruction and properly adjusted. [. . . ] Activate the opener only when door is in full view, free of obstruction and properly adjusted. (On Models 751E, 752E and 754E, the push button (1) is normally used only for code switch application. Press and release the green "Smart" button (3) on the opener panel. Now the opener will operate with all remotes having matching code switch positions. figure 5 - (1) battery compartment cover; (2) connector; (3) battery. Figure 6 - Attach Clip Holder and Visor Clip: Follow instructions shown in A and B: (1) Case screw (do not overtighten) (2) Clip holder (3) Tab (4) Square hole in case (5) Visor clip GB Figure 6 - Mise en place du support de pince et de la pince de paresoleil: Suivez les instructions indiquées en A et B: (1) Vis du boîtier (ne pas trop serrer) (2) Support de pince (3) Languette (4) Trou carré dans le boîtier (5) Pince de pare-soleil F 1999/5/EC I, the undersigned, hereby declare that the equipment specified above and any accessory listed in the manual conforms to the above Directives and Standards. [. . . ] figure 5 - (1) battery compartment cover; (2) connector; (3) battery. [. . . ]