User manual CHAMBERLAIN 963D
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CHAMBERLAIN 963D. We hope that this CHAMBERLAIN 963D user guide will be useful to you.
Manual abstract: user guide CHAMBERLAIN 963D
Detailed instructions for use are in the User's Guide.
[. . . ] ®
Model 963D Security® 3-Button Remote Control with Proximity Lighting Feature
OWNER'S MANUAL
For use with 315MHz Security® garage door openers and universal receivers that have a purple "learn" button and 315MHz gate receivers. NOTE: To activate the remote control functions, pull out the plastic pull tab protruding from the remote control housing. [. . . ] With the door closed, press and hold the remote button that you want to control the light. The opener lights should turn on or off but the door should not move.
To Add or Reprogram the Remote Control
OR
Open/Close/Stop Operation
1. NOTE: Feature only available on openers equipped with a multi-function control panel. Your 315MHz Security® remote control can be programmed to operate one door using all 3 buttons: the button with one light slot will only open the door, the button with two light slots will close the door, and the button with three light slots will stop the door's movement. With the door closed, press and hold the button with one 1 Light Slot light slot. Press and hold the Lock 2 Light Slots button on the multi-function (Close) control panel. Press the 2 light slot button (Close) while the door is moving and it should close. Press the 3 light slot button (Stop) and the door should stop immediately.
To Erase All Codes From Motor Unit Memory
To deactivate any unwanted remote, first erase all codes: Press and hold the "learn" button on motor unit until the learn indicator light goes out (approximately 6 seconds). Reprogram each remote or keyless entry you wish to use.
The Remote Control Batteries
Troubleshooting
PROBLEM SOLUTION Check if proximity lighting is disabled by pressing a button. Reduced proximity sensing (does not activate by touching top of remote control) The Proximity Sensor may be oversensitized. Sit remote control undisturbed for 60 seconds on a non-metallic surface. Replace 3V2450 battery with same type 3V2450 coin cell.
To prevent possible SERIOUS INJURY or DEATH: · NEVER allow small children near batteries. [. . . ] 10A19 10A33 29C151 DESCRIPTION 3V2016 Lithium Battery: LED and Opener 3V2450 Lithium Battery: Proximity Switch Visor Clip QTY 2 1 1
FOR SERVICE, DIAL OUR TOLL FREE NUMBER: 1-800-528-9131
Proximity Battery
LED and Opener Batteries
Spring Contact
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
114A3566
©2007, Chamberlain Group Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CHAMBERLAIN 963D
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CHAMBERLAIN 963D will begin.