User manual CITIZEN WATCH 6870

[. . . ] Names of Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mode (Display Function) Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 *0 Position Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] * When setting the alarm time, be careful that AM and PM are set correctly by referring to the 24H hand. <Canceling Alarm Set Time> The alarm set time is canceled by pressing button A when the alarm is ON. <Alarm Monitor> The alarm sound can be monitored by pressing button A in the alarm 1 mode when the alarm is OFF. Once the alarm is set, the alarm sounds for 15 seconds at the alarm set time, once a day. The alarm sound can be stopped by pressing any of buttons A , B or C . <Daily Alarm ON Display> Alarm set time (hours, minutes) B A Press button M to switch to the alarm 2 (AL-2) mode. The second hand will indicate either ON (23 second position) or OFF (19 second position). In both cases, the hour, minute and 24H hands will indicate the alarm set time. C Alarm ON M Correction position 14 <Setting the Alarm Time> (1)Pull button M out. (2)Press button B or C to move the hour, minute and 24H hands to the time at which the alarm is desired to be set. · Correction can be made one minute at a time, in the clockwise direction, each time button B is pressed. · Correction can be made one minute at a time, in the counterclockwise direction, each time button C is pressed. Correct the alarm set time by moving the hands in the closest direction to the desired alarm time. * When setting the alarm time, be careful that AM and PM are set correctly by referring to the 24H hand. <Switching Between Alarm ON and OFF> The alarm will switch between ON and OFF each time button A is pressed with button M pulled out. <Alarm Monitor> The alarm sound can be monitored by pressing button A in the alarm 2 mode when button M is in the normal position. Use of Chronograph [CHR] The chronograph is able to measure time up to a maximum of 59 minutes, 59 and 19/20th seconds in 1/20th second increments after which the chronograph returns to the chronograph reset display and stops. In the chronograph mode, the hour, minute and 24H hands as well as date indicate the current time and date. [Chronograph Reset] [During Chronograph Measurement] <Explanation of Display> Chronograph minutes: Read the function hand. Chronograph 1/20 seconds: The function hand will change to the 1/20th second display when button B is pressed during the stop or split display. <Use of Accumulated elapsed Time Measurement> (1)The chronograph is started and stopped by pressing button A . (Starting and stopping the chronograph can be repeated as many times as desired. ) (2)The chronograph is reset by pressing button C when it is stopped. A confirmation beep will sound when either the start, stop or split operation is selected. B A Function hand (chronograph minutes, chronograph 1/20th seconds) C C M A Reset Second hand (chronograph seconds) Measurement A Stop 16 17 <Use of Split Time Measurement> (1)The chronograph is started and stopped by pressing button A . [. . . ] Measuring how many seconds a car travels over a distance of 1km enables the tacymeter scale to show the approximate average speed per hour during a journey (if this 1km is covered within a maximum of 60 seconds. ) If the chronograph is started at the beginning of the distance measurement, and stopped after 1km, the average speed per hour can be determined by the position of the chronograph second hand. If 1km is covered in 45 seconds, the average speed will be about 80km/h. 24 13. Water resistance Check the chart to determine the water-resistant properties of this watch. WATER RESISTANT may sometimes be abbreviated as WATER RESIST. Water-related use Indication Washing face or getting wet in the rain that is, when Specification Case back splashed over the watch and no water pressure is applied to it. [. . . ]