User manual CITIZEN WATCH C390

[. . . ] 55 60 NAUT . 70 70 ST AT . 50 50 4 5 4 40 55 8 0 5 8 0 90 40 24 18 6 12 ME C TT 24 2 22 4 20 18 6 16 8 14 12 10 80 10 10 35 35 11 11 12 30 SE AL 30 P 13 12 A L-1 H D ST C KM . 13 R L A L-3 A -2 1 4 15 15 16 16 17 17 18 18 19 19 20 2 1 22 23 20 2 12 24 2 23 2 24 2 5 5 1 4 English CONTENTS 1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Names of Components and Major Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When displaying elapsed time: · Elapsed time is displayed from 0 hours, 00 minutes and 00 seconds to 99 hours, 59 minutes and 59 seconds. The display changes to "ER" when the elapsed time exceeds 100 hours. Time is continued to be measured inside the watch even when "ER" is displayed. <Changing Destination City Name, Arrival Time and Arrival Date> 1. When the city name, arrival time and arrival date are changed once they have been set, the remaining time is recalculated and displayed based on the new city name, arrival time and arrival date. If the city name set with the destination timer is set to "OFF" with the zone setting function and the watch is again returned to the destination timer, "ER" is displayed and the next city name (in the UP direction) is displayed for the city name. 34 35 A Display of remaining time [Destination Timer] B Display of arrival time Display of arrival date 12. Using Zone Setting The zone setting function enables only those cities for which "SET" has been selected to be easily accessed (displayed) in each mode. In addition, the user is also able to arbitrarily register one city and time difference. *1 *1 Crown in normal position A Crown at 2nd click [Destination Timer Correction State] DST RUN/STP Switching A Setting of destination city A Setting of arrival minutes A Setting of arrival hours A Setting of arrival year Setting of arrival month Setting of arrival day A A A *1: Returns automatically after 10 seconds 36 37 <Using Zone Setting> 1. Turn the crown while in the normal position and set the mode hand to the mode setting [SET] mode. The city can be changed by pulling out the crown to the first click (for changing cities between SET and OFF and for setting the location for switching to daylight savings time). · Turning the crown continuously causes the cities to advance rapidly. Press button (A) to set the city and press button (B) to set daylight savings time. After setting, return the crown to the normal position. <Registration of Arbitrary City and Time Difference> <Confirming Set Cities> 1. When button (A) or button (B) is pressed when the watch is in the zone setting [SET] mode (with the crown in the normal position), the city name and SET or OFF are displayed each time the button is pressed. · Only those cities for which SET is displayed can be accessed from each mode. 1. Turn the crown while in the normal position and set the mode hand to the zone setting [SET] mode. When the crown is pulled out to the second click, the watch enters the correction state for the third letter of the city name. 38 39 3. Turning the crown displays those characters that are used for city names. · Turning the crown continuously causes the characters to advance rapidly. When button (A) is pressed during the correction state of the first character of the city name, the watch enters the correction state for the time difference from UTC. After setting, return the crown to the normal position. <Characters and Symbols Used in City Names> · Letters of the alphabet (A to Z) · Numbers (0-9) · Symbols (--: hyphens, : blank spaces) <Display Sequence> When the crown is turned forward (clockwise), the display changes in the order of letters (A-Z), numbers (0-9) and then symbols ( : blank spaces, --: hyphens). When the crown is turned backward (counter-clockwise), the display sequence is opposite that when turning the crown forward. 40 41 <Order in which Registered Cities are Displayed> The location having the same time difference among the 30 cities pre-registered in this watch is displayed first. However, a city is not displayed if the time difference of a registered city has not been set. 13. [. . . ] · To clean a metal, plastic, or rubber watchband, wash away dirt with mild soap and water. Use a soft brush to remove dust and dirt jammed in the gaps in the metal band. If your watch is not water-resistant, take it to your dealer. CAUTION · Do NOT operate the crown or button with wet fingers or when the watch is wet. · If the watch is used in seawater, rinse with fresh water afterward and wipe with a dry cloth. 54 55 NOTE: Avoid using solvents (thinner, benzine, etc. ), as they may mar the finish. WARNING: Handling of the battery · Keep the battery out of the reach of small children. [. . . ]