User manual CLIMADIFF CLIMA19

[. . . ] Young children should be supervised to ensure that they do not play with the air conditioner. If the power cord is to be replaced, replacement work shall be performed by authorised personnel only. Installation work must be performed in accordance with the national wiring standards by authorised personnel only. When there are wide differences between USER S MANUAL and Remote controller Illustration on function description, the description on USER S MANUAL shall prevail. [. . . ] mE D IS PL A Y RESET L O C K TEMP ECONOMY TIMER ON ON/OFF FAN SPEED TIMER OFF TURBO FAN HIGH MED LOW 1pc Fig. 2 4 5 AIR CONDITIONER FEATURES E LE CT RONI C CONT ROL OP E RATI NG INS T RUCT I ONS Before you begin, thoroughly familiarize yourself with the control panel and remote controller and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit control panel alone or with the remote controller . NOTE: This manual does not include Remote Controller Operations, see the <<Remote Controller Instruction>> packed with the unit for details. Each time you press the button, a mode is selected in a sequence that goes from COOL, FAN and DRY . NOTE: On above modes, the unit operates the auto fan speed automatically. You can set fan speed only by the remote controller on COOL and FAN modes. To convert from one to the other, press and hold the Up and Down buttons at the same time, for 3 seconds. OPERATING INSTRUCTIONS Operating Instructions COOL operation - Press the "MODE" button until the "COOL" indicator light comes on. - Press the ADJUST buttons "▲" or " " to select your desired room temperature. The temperature can be set within a range of 17OC-30OC/62OF-88OF(or 86OF). - Press the "FAN" button on the remote controller to choose the fan speed. DRY operation Press the "MODE" button until the "DRY" indicator light comes on. Under this mode, you cannot select a fan speed or adjust the temperature. OPERATION PANEL OF THE AIR CONDITIONER 4 1 FAN operation Press the "MODE" button until the "FAN " indicator light comes on. Press the "FAN" button on the remote controller to choose the fan speed. 3 2 Power indicator light 2 Timer mode indicator light (set only by remote controller) 3 4 LED Display Shows the set temperature while on cool mode. Error codes: E1- Room temperature sensor errorUnplug the unit and plug it back in. E2- Evaporator temperature sensor errorUnplug the unit and plug it back in. E4- Display panel communication errorUnplug the unit and plug it back in. Protection codes: P1- Bottom tray is full - Connect the drain hose and drain the collected water away. SLEEP operation This feature can be activated from the remote control ONLY. [. . . ] NOTE: The grill and the air filter are connected and can be separated. Unit enclosure - Use a lint-free cloth soaked with neutral detergent to clean the unit enclosure. Unit idle for a long time Remove the rubber plug at the back of the unit and attach a hose to drain outlet. Gurgling sound - The sound comes from the flowing of the refrigerant inside the air-conditioner. [. . . ]