User manual COBY DVD-427 Release Note

[. . . ] COBY DVD427 (DVD227+ CSP62) IMPORTANT PLEASE READ! COMMON TROUBLESHOOTING ISSUES ISSUE #1 BLANK OR BLACK SCREEN Make sure your TV is turned to the correct Video line (AV Input/Video Input 1, 2, 3. etc). [. . . ] NTSC is for the United States TV broadcast system. ISSUE #4 NO SOUND There is a three-prong cord (Yellow, Red and White), Connect ONLY the Yellow prong from the DVD player into your TV. There is a Green 3. 5mm prong, connect the Green portion to the Subwoofer INPUT. At the other end of the Green 3. 5mm prong, there is a Red and White prong. Connect the Red and White prong into the DVD player L-CH and R-CH. ISSUE #5 PICTURE FADES DARK TO LIGHT You cannot connect the DVD through your VCR, TV/VCR combo, Cable or Satellite. If you cannot connect directly to the TV via a yellow video input, then you will need to purchase an RF Modulator and a four-foot coaxial wire at your local electronics store. ISSUE #6 HAD PICTURE, NOW RECEIVING A BLACK OR BLUE SCREEN The DVD player may be set to Progressive Scan Mode. You will need to change the Video mode from Progressive Scan to Composite. On the remote control press the RETURN button once, and then press the MODE button three times. RESET THE DVD PLAYER BACK TO THE DEFAULT SETTING Make sure you do not have a disk in the tray. [. . . ] You can also reach us online at customerservice@cobyusa. com or techsupport@cobyusa. com 1-800-681-2629 OR 718-416-3197 [. . . ]