User manual COBY DVD-524 Release Note

[. . . ] COBY DVD524 IMPORTANT PLEASE READ! COMMON TROUBLESHOOTING ISSUES ISSUE #1 NO PICTURE Make sure your TV is turned to the correct Video line (AV Input/Video Input 1, 2, 3. etc). [. . . ] NTSC is for the United States TV broadcast system ISSUE #4 NO SOUND OR BACK GROUND SOUND WITH NO VOICES Make sure the Red and White wire is connected into your TV "AUDIO IN". Make sure the DVD player Audio setting Analog Out is set to 2 Channel. ISSUE #5 PICTURE FADES DARK TO LIGHT You cannot connect the DVD through your VCR, TV/VCR combo, Cable or Satellite. If you cannot connect directly to the TV via a Yellow Video input, then you will need to purchase an RF Modulator and a four-foot Coaxial wire at your local electronics store. ISSUE #6 HAD PICTURE, NOW RECEIVING A BLACK OR BLUE SCREEN The DVD player may be set to Progressive Scan Mode. Point the remote control directly at the DVD player, and then press the PSCAN button 23 times. If you are still encountering problems with the DVD player, reset the unit back to the default setting. RESET THE DVD PLAYER BACK TO THE DEFAULT SETTING Make sure you do not have a disk in the tray. Using the DVD player remote control: 1) Press the "Setup" button. [. . . ] You can also reach us online at customerservice@cobyusa. com or techsupport@cobyusa. com 1-800-681-2629 OR 718-416-3197 [. . . ]