Detailed instructions for use are in the User's Guide.
[. . . ] AS OF AUGUST 1, 2008
GLM-100E, CM-311E CM-311AE, CM-312E, CM-312AE
CONNECTIONS FOR WIRELESS MICROPHONE APPLICATIONS
For more help, contact one of these technical support numbers: Crown 800-342-6939 AKG 800-878-7571 Audio-Technica 330-686-2600 Beyerdynamic 800-293-4463 Comtek 800-496-3463 Electro-Voice 877-863-4168 HM Electronics 800-848-4468 Lectrosonics 800-821-1121 Lightspeed 800-732-8999 Nady 510-652-2411 Paso 800-231-3034 Peavey 877-732-8391 Samson 800-3-SAMSON Shure 847-600-8440 Sony 866-766-9272 Telex 800-553-5992 TOA 800-733-4750 Vega 800-877-1771
Crown Audio, Inc. Elkhart, IN 46517-9439 TEL: 574-294-8000 FAX: 574-294-8FAX www. crownaudio. com
© 2008 Crown Audio®, Inc. [. . . ] With bipolar powering (B+ and B- relative to ground), the GLM can handle up to 150 dB SPL. Not all transmitters provide bipolar powering.
GLM-100E WIRING, 3-WIRE POWER
GLM-100E WIRING, 2-WIRE POWER
MODEL
AKG WMS40 (PT40) WMS400 (PT400) WMS4000 (PT4000)
CONNECTOR
TA3F
PINS
1-shield 2-white 3-red
MODEL
Samson ST-2
CONNECTOR
Hard wired
PINS
1 and 2-shield 3-red (B+) 4-white (audio) 1-red (B+) 2-white (audio) 3 and 4-shield Ground-shield and white Center-red 2-red 3-white and shield shell-shield 1-shield 2-red 3 and 4-white 1-white 2-red 4-shield 3-jumper to pin 1 1-red 2-white 3 and 4-shield 1-shield 2-white 3-red Tip-red, Sleeve-shield and white To prevent capsule damage from static sparks, solder a 3. 3K resistor between white and tip. 1-white 2-red 4-shield
Samson CT-3
Hard wired
________________________________________________________ Sennheiser SK-2012 Audio-Technica Hirose HRI01 and 2-shield ATW, T31, T35, 7P-4S 3-white T27, WT-15, 4-red T51, T75, ATW T21 4 pin DIN case-shield 1-white 3-red 1-shield 2-red 3-white 2-shield 3-white 4-red 1-shield 2-white 3-red Lemo 4-pin 1-red 3-white 4-shield 1-shield 2-white 3-red 1and 4-shield 2-red 3-white 1-shield 3-white 4-red 1-shield 2-red 3-white Switchcraft TA3F 1-shield 2-white and red 3-jumper to pin 1 Switchcraft TA3F Hirose HR107P-6S 1-red 2-shield and white 1-red 2-white 6-shield Shure L-11, SC1, LX1, U-1 (UHF), T-1 UT-1, UC-1 U1L-VA UC1L
Sennheiser/ B&K microdot Lemosa
Switchcraft TA4F
Beyerdynamic TS-170, TSP, TS-600 TS-190, TS-900 (UHF) Comtek M72, M72-B
Lemo FG331
Lemo 4-pin
4-pin binder conn. #711 750 mono mini, 851 micro mini, Switchcraft TA4F, Switchcraft TA4F
Sony WRT-28, WRT-820A Telex WT-55, WT-60, WT-80, WT-150, WT-450 TOA WM-340U, WM-370
SMC-9
Switchcraft TA4F or Lemo 4-pin
Electro-Voice MB2000A, MB2500 HME TX-425, TX-550, TX-822 Lectrosonics M185, UM190, UM195, M187, UM200 Lightspeed Technologies BP Series Nady All models Paso MA-23, MA-27
Mini phone plug
Switchcraft TA4F
Switchcraft TA5F
Vega
Hirose HR107P-4S Switchcraft TA3F
Lemo 4-pin F. O. Switchcraft TA4F 1-red 3-white 4-shield X-wire TA3F 1-shield 2-white 3-red
Peavey BPX Samson TX-3, UT-5, UT-4, BT-3, CT-2
CONNECTIONS TO CM-311AE, CM-312AE AND CM-312E
MODEL
CONNECTOR
PINS
1-shield 2-white 3-red
MODEL
Samson TX-3, UT-4, BT-3, CT-2 UT-5
CONNECTOR
Hirose HR107P-6S Hirose HR107P-6S No connector
PINS
1-red 4-white 6-shield 1-red 2-white 6-shield 1 + 2-shield 3-red (B+) 4-white (audio) 1-red (B+) 2-white (audio) 3 + 4-shield 1-shield 2-red 3-white 4-jumper to pin 3 1-white 2-red 4-shield 3-jumper to pin 1 1-red +5V 2-white 4-shield T-white R-red +5V S-ground 1-shield 2-white 3-red
AKG TA3F WMS40 (PT40) WMS400 (PT400) WMS4000 (PT4000) Audio-Technica ATW T35, T27, WT-15 ATW T21 (now obsolete) Hirose HR107P-4S
1 and 2-shield 3-white 4-red case-shield 1-white 3-red 1-shield 2-red 3-white 2-shield 3-white 4-red 1-shield 2-white 3-red or TA3F, Lemo 4-pin 1-red 3-white 4-shield. If RFI, use 200-560 pF capacitor between pins 3 and 4
ST-2
4 pin DIN
CT-3
No connector
Beyerdynamic TS-170, TSP TS-600 TS-190, TS-900 (UHF) Comtek M-72, M72-B M-182, M-82
Lemo FG331
Shure L-11, SC1, LX1, U-1 (UHF), T-1 U1L-VA
Switchcraft TA4F
4-pin binder conn. #711 750 mono mini, 851 micro mini, Switchcraft TA4F
Lemo 4-pin UC1L
Sony WRT-820A
SMC-9
Electro-Voice MB2000A MB2500
TA4F
WRT-805A
3. 5 mm mini-plug
R100 R200 HME All models
see Telex notes see Telex notes Switchcraft TA4F
Telex WT-55, WT-60, WT-80, WT-150, WT-450
Switchcraft TA4F or Lemo 4-pin
1-shield 2-white 3-red HME note: To increase bass and reduce treble at the expense of output level, solder a 6. 8K resistor between pin 2 and its wire inside the transmitter. Lectrosonics M185, M187 UM190, UM195 UM200 Lightspeed Technologies BP Series Nady All models Switchcraft TA5F 1-shield 2-red 3-white 1-shield 3-white 4-red 1-shield 2-red 3-white
Vega
Lemo 4-pin F. O. 304 NYL U/3. 2 Switchcraft TA4F
1-white 2-red 4-shield 1-red 3-white 4-shield 1-shield 2-white 3-red
Hirose HR107P-4S Switchcraft TA3F
X-wire
TA3F
CONNECTIONS TO CM-311E
The CM-311E works only on 9V. If your transmitter supplies 9V at its connector, you can connect a CM-311E to your transmitter as described in the chart below.
NOTE: To convert a CM-311 or CM-311A for wireless use, either cut the cable and add the CM-311AE EQ module or connect the beltpack XLR output to the transmitter input. XLR: 1 + 3 = shield, 2 = audio (no B+ needed).
MODEL
Audio-Technica ATW T35, T27
CONNECTOR
Hirose HR107P-4S
PINS
1and 2-shield 3-white 4-red. case-shield 1-white 3-red 1-shield 2-red 3-white 2-shield 3-white 4-red. [. . . ] Lectrosonics M185, M187 UM190, UM195 UM200 Lightspeed Technologies BP Series Switchcraft TA5F 1-shield 2-red. 304 NYL U/3. 2 Switchcraft TA4F
Hirose HR107P-4S
WIRING DIAGRAMS
Connecting Crown Microphones to a Micron Transmitter
LEMO FFA2C308 MIC CABLE CONNECTOR (VIEW FROM SOONNECTORLDERING SIDE OF C)
MODEL
CM-10E
PINS
3 - yellow 6 - shield 4 - black Jumper between 5 & 6 4. 7K between 8 & 3 8 - red 3 - white 6 - shield Jumper between 5 & 6 8 - red 3 - white 6 - shield Jumper between 5 & 6 8 - red 3 - white 6 - shield Jumper between 5 & 6
CM-311AE
CM-312AE
GLM-100E
Wiring CM-311AE, CM-312AE or GLM-100E to TA3F and TA4F Connectors
T
T
T
T
T [. . . ]