User manual CYBEX PALLAS

[. . . ] You must not use the CYBEX child seat with a two-point belt or a lap belt. When securing your child with a two-point belt, the child may sustain lethal injuries in an accident. Please note the following for such cases: –– In cars equipped with airbags you should push the passenger seat as far back as possible. €– You must follow the recommendations of the vehicle manufacturer. [. . . ] Pull the adjustment handle (h) in order to unlock the shoulder and headrest. Lift the booster cover until the seat inlay can be easily removed from the front. Put the seat cover back in its original position and fasten the press buttons. 11 Safety cushion ADJUSTMENT - ECE GROUP 1 (9-18 KG) By pushing the buttons (z) the safety cushion (p) will slide into the forefront position. By releasing the buttons (z) the safety cushion (p) will be locked in position. The side parts of the safety cushion (p) fit exactly into the armrests of the booster cushion. The safety cushion should be well adjusted to touch the child‘s chest without exerting any pressure on the child`s body. Safety cushion (p) may only be used in conjunction with the main frame (w) and only up to a mximum weight of 18kg!SITTING AND RECLINING POSITION – ECE GRoup 1 (9 - 18 KG) It is not necessary to open the car belt system (f), to bring the CYBEX child seat into reclining position. €– When the child is about to fall asleep, pull the handle (v) and the seat slides down automatically. €– When the child is no longer in the seat you can move the seat into an upright position by again pulling the handle (v) and slightly pressing against the booster. Make sure that the handle (v) of the reclining mechanism is audibly locked in any position. The reclining position is only approved for ECE Group 1 (9-18 kg), in conjunction with main frame (w) and safety cushion (p)!RECLINING HEAD REST The CYBEX Pallas has a reclining headrest (r) preventing your child‘s head from falling forward when asleep. Furthermore, this adjustable headrest contributes to the comfort of your child during the car ride. Please ensure that the child‘s head always remains in contact with the reclining headrest since otherwise the headrest cannot fulfill its optimal side-crash protective function. By slightly lifting the headrest, the inclination of the headrest (r) can be adjusted in three different positions. In case of an accident, the free movement of the inclination must be guaranteed since otherwise your child might be injured. V a w d q s 13 Fastening of seatbelt with safety cushion attached - ECE group 1 (9-18 kg) 1. Attach the previously adjusted safety cushion to the child seat (see chapter „Safety cushion adjustment“). Press the release buttons (q) until you can feel some resistance (d) and pull it away from the main frame until you feel a resistance. Now pull the reclining handle (v) situated centrally on the bottom of the booster (d) and completely pull the booster off the frame (w) . [. . . ] Please do not use chemical detergents or bleaching agents under any circumstances!19 What to do after an accident In an accident the seat can sustain damages which are invisible to the eye. Durability of the product The CYBEX child seat was designed to easily fulfill its purpose for the expected durability (adding up to 11 years). However, since high fluctuations of temperature might occur and since there might be unforeseeable exposures to the child seat, it is important to note the following: –– If the car is exposed to direct sunlight for a longer period of time, the child seat must be taken out of the car or covered with a cloth. [. . . ]