User manual CYBEX S-FIX SCUDERIA FERRARI VICTORY

[. . . ] Without the approval of the certification office, the child seat may not be modified or added to in any way. Failure to comply with the above will result in the protective function of the child seat no longer being guaranteed. The child seat only offers optimum protection for your child if you follow the usage instructions precisely. 18, 95448 Bayreuth Germany Certification UN R 44-04, group 2/3, 15 to 36 kg CYBEX SOLUTION S-FIX seat cushion with backrest and headrest Recommended for: Age: from approximately 3 to 12 years Weight: 15 to 36 kg Body height: up to 150 cm Only suitable for vehicle seats with automatic three-point belts approved in accordance with UN regulation R16 or a comparable standard ERSTMONTAGE . [. . . ] If the green safety indicators (11) are visible, you must first release the ISOFIX Connect locking arms before joining by pressing and pulling back the release button (10). € Push the two locking arms (8) into the ISOFIX guides (7) until these lock into place in the ISOFIX locking arms with an audible ‘click’. € Ensure that the seat is secure by trying to pull it out of the ISOFIX guides (7). € The green safety indicator (11) must now be clearly visible on the two grey release buttons (10). € You can now use the ISOFIX adjustment lever (9) under the booster seat (1) of the CYBEX SOLUTION S-FIX child seat to adjust the position. Note the information in the section “Placing the seat in the vehicle”. When using the child seat on a middle position in the vehicle, it‘s prohibited to fold out the L. REMOVAL OF THE CYBEX SOLUTION S-FIX Perform the installation steps in the reverse order. € Unlock the ISOFIX Connect locking arms (5) on both sides by pushing the grey release buttons (10) and pulling them back simultaneously. € Operate the ISOFIX adjustment lever (9) on the axis (4) of the CYBEX SOLUTION S-FIX and push the locking arms in as far as they will go. By folding in the ISOFIX Connect locking arms (5), you are not just protecting the vehicle seat but also the locking arms of the ISOFIX Connect system from dirt and damage. ADAPTING TO BODY SIZE • The seat can then be adjusted to your child’s body simply by using the adjustable headrest (12). To do this, pull the adjustment lever (13) upwards to unlock the headrest (12). € Adjust the headrest so that there is at maximum 2cm gap (approximately two fingers) between the child’s shoulder and the lower edge of the headrest. Only an optimally adjusted headrest (12) can offer your child maximum protection and comfort while ensuring that the diagonal belt (6) can be fitted smoothly. The height of the CYBEX SOLUTION S-FIX can be adjusted to one of twelve positions. Slightly and fold it, until it locks with an audible “CLICK”. EN The child seat is equipped with the “Linear Side-impact Protection“ system (L. This system increases the safety of your child in case of side impact. Pull the three-point belt right out and feed it along the belt buckle (14) in front of your child. The three-point belt must only be passed through the designated routings. The belt routings are described in detail in this manual and are marked in red on the car seat. [. . . ] An accident may cause damage to the child seat that is not identifiable with the naked eye. PRODUCT LIFESPAN This child seat has been designed to be able to fulfill its intended functions by ordinary use for a product life span of approx. Gradual wear of the plastic, for example caused by exposure to sunlight (UV), can cause slight deterioration of the product’s properties. Since very high temperature fluctuations and other unforeseeable stresses are common in vehicles, it is necessary to observe the following points: • If the vehicle is directly exposed to strong sunlight for long periods, the child seat must be removed from the vehicle or covered with a light cloth. [. . . ]