User manual CYBEX SIRONA M2 I-SIZE

[. . . ] For maximum protection and best comfort for your child it is essential to read and follow the entire instruction manual carefully. For maximum protection and best comfort for your child it is essential to read and follow the entire instruction manual carefully. Always keep the User Guide handy in the slot provide for it under the cover, on the back of the backrest. Do not use forward-facing before the child is 15 months old and reached a size of 76 cm. [. . . ] Make sure that CYBEX SIRONA M2 i-Size still rests flat on the car seat. The supporting leg (4) must always be in direct contact with the vehicle floor. There must be no objects or spaces between the vehicle floor and the supporting leg. If there are storage compartments in the floor of the vehicle you must contact the vehicle manufacturer. 25 IT Push the adjustment button (9) and pull the supporting leg (4) out until it touches the vehicle floor. After this, pull the foot out to the next locking position to ensure optimal force transmission. The supporting leg indicator (10) on the base will show GREEN and a characteristic ‚CLICK‘ may be heard. Please ensure that the surface of the Base M i-Size is free of objects. Put the CYBEX SIRONA M2 i-Size in the required direction onto the Base M i-Size. Releasing the CYBEX SIRONA M2 i-Size car seat Push the central release button (12) and one of the release buttons on the side (13) simultaneously to unlock the CYBEX SIRONA M2 i-Size from the base. Now you can release the unlocking buttons (12) and (13) to lift the CYBEX SIRONA M2 i-Size off the Base M i-Size. € Unlock both ISOFIX connectors (7) through pushing the buttons (5 and 6) simultaneously and pull them out of the ISOFIX connect guides. € By pressing the adjustment button (9) you can push back the supporting leg into its original position and then fold it back to save space. ADJUSTMENT FOR SITTING AND RECLINING CYBEX SIRONA M2 i-Size offers up to five different sitting and reclining positions for the safe and comfortable transport of your child in the car. If wanted, activate the position adjustment handle (14) on the front of the child seat, to put the CYBEX SIRONA M2 i-Size in the required reclining positions. Always make sure that the seat shell locks into place with an audible „CLICK“. Newborns and infants who are not yet able to sit up by themselves (up to around 1 year) should, for orthopedic and safety reasons, always be transported in the flattest recline position rearward-facing. For safety reasons adjusting between sitting and reclining positions during travel is strictly prohibited!This system increases the safety of your child in case of side impact. Out to the nearest position on the door side for having the best possible safety. When using the SIRONA M2 i-Size on a middle position in the vehicle, it‘s prohibited to fold out the (L. ) device for carrying or climbing into the SIRONA M2 i-Size is prohibited. [. . . ] € Avoid getting any dirt or sand in between the upper seat shell and the base. This can have a negative impact on the performance of the rotation and recline function. Should this happen the dirt should be removed before rotating and reclining the seat any further to avoid any permanent damage of the seat. After a drop, accident or any other form of direct impact, it must be tested by the manufacturer before being used again. [. . . ]