User manual CYBEX TOPAZ

[. . . ] Attention: Read these instructions carefully before use and keep them for future reference. Your child`s safety may be affected if you do not follow these instructions. Lining Zipper for opening carry cot Detachable top cover Warning: Do not leave your child unattended. [. . . ] therefore , it is possible to remove the top , or open it partially on one side or in an intermediate position. This allows you to attach the top cover with the loops to the suitable fasteners. Insert the connectors of the carry cot into the slots of the stroller until both buttons are completely snapped in place. To remove the carry cot from the buggy, press the snap buttons of the adapter. (Image 3) Attention: Before each use make sure that the adapter is safely fastened. To protect the child from sunlight you may use the TOPAZ canopy on the carry cot. Insert the connectors of the canopy into the respective slots of the carry cot. (Image 4) Now connect the canopy to the carry cot by using the zipper. To remove the canopy find the opening on the inside of the carry cot and press the snap buttons through the fabric on the left and right side of the carry cot. (Image 6) Please note that the canopy is included in delivery of the CYBEX buggys and not in the delivery of the carry cot. ­ The carry cot may be had washed in luke warm water after removing the protection strips, the mattress and the base. However, in case of heavy rain water may penetrate through the seams and cause water stains. This product was approved according to the EN 1888:2003 + A1/A2/A3:2005 and EN 1466:2008. When you are done using your TOPAZ carry cot, a proper disposal is important. [. . . ] In case of any damages, do not use the TOPAZ carry cot, but immediately send it back to be checked. The TOPAZ carry cot must be handled and used according to the instruction manual. This product is only suitable for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees. [. . . ]