User manual DAIKIN SKY AIR-F

[. . . ] SKY AIR-F - wireless room thermostat option kit, - consists of a wireless receiver and thermostat, - mainly used for existing installations. EKRTETS - optional external temperature sensor for the SKY AIR-F. 2. Main features The main features are: Room temperature control, based on the measurements of the temperature sensor inside the thermostat or of the external temperature sensor EKRTETS. Cooling and heating mode (with possibility to disable cooling function if not required). [. . . ] Setting the desired mode: heating or cooling This is only possible if cooling mode is available. 4. 2. NOTE 1 2 3 Press < to go to comfort mode (A). Press < during 5 seconds to go to the heating/cooling selection mode. Press < or > to switch to the desired mode. The thermostat returns to the schedule timer mode (B). Operation manual 6 SKY AIR-F + EKRTETS Room thermostat 4PW56106-1 4. 3. 1 Setting the desired setpoint Navigate to the comfort mode (A) by pressing < or > to set the comfort setpoint. Refer also to "Description of the function modes and menus" on page 8. The room temperature is displayed (R). 2 3 SKY AIR-F + EKRTETS Room thermostat 4PW56106-1 Operation manual 7 5. Modes in the standard menu A B C D Press < or > to switch to the desired mode. Use this mode for a fixed temperature on comfort level (comfort setpoint default on 21. 0°C/70. 0°F in heating mode, 24. 0°C/75. 5°F in cooling mode). Use this mode to let your installation be controlled by the schedule timer. The actions programmed in the schedule timer will be executed automatically according to the actual time. The functionality of the locked/unlocked schedule timer mode is explained in "Manually overriding a schedule" on page 12. Pressing > goes to the next step. 1 If needed, activate the advanced mode by pressing > during 5 seconds in OFF mode (D). Press + or - until 1 or 2 flashes and press = to confirm. 2 3 4 Press < or > to move to the day you want to program and press + to select or - to deselect it. Press = to confirm. 5 6 Press + or - to adjust the setpoint of the first action. The first action starts at 00:00 and lasts until the end time which you set up in the next step. SKY AIR-F + EKRTETS Room thermostat 4PW56106-1 Operation manual 13 7 Press = to confirm. 8 Press + or - to adjust the end time of this action. Programming a day is finished when the end time of the last scheduled action is set to 23:59. Press = to confirm. 9 10 Repeat step 6 till 9 for the next scheduled actions of this day. 11 To program the remaining days, repeat above steps. Do this for all days of the week. NOTE Once programmed you can only modify programmed actions one by one and no additional actions can be added. You can clear a user-defined schedule again by selecting it (1 or 2 should be flashing) and then pressing < during 10 seconds. "©¬® 1" or "©¬® 2" appears on the LCD to confirm the schedule is cleared. Your installer can link a custom schedule to cooling and heating mode. Refer to "Setting up of codes in the installer menu" (code 8® 01) in the installation manual. Operation manual 14 SKY AIR-F + EKRTETS Room thermostat 4PW56106-1 6. 5. Using the holiday mode Use the holiday mode to set a fixed setpoint during a long absence. The default holiday setpoint for heating is 14. 0°C/57. 5°F, for cooling 30. 0°C/86. 0°F. [. . . ] Replacing batteries When the "low battery" icon r flashes, batteries need to be replaced. Once the icon flashes, you still have ±30 days to replace them before the thermostat completely shuts down. With normal operation conditions the battery lifetime is ±2 years. Refer also to the technical characteristics in the installation manual. [. . . ]