User manual DATALOGIC DATALOGIC JET

[. . . ] Vitalino 13 40012 - Lippo di Calderara di Reno Bologna - Italy Datalogic JetTM - User's Manual Ed. : 11/2007 ALL RIGHTS RESERVED Datalogic reserves the right to make modifications and improvements without prior notification. Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Product names mentioned herein are for identification purposes only and may be trademarks and or registered trademarks of their respective companies. 2004-2007 CONTENTS REFERENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If an application hangs, initiate a warm boot to terminate the application. To perform a warm boot, press the following keys simultaneously: Cold Boot A cold boot is a complete reset of the Jet in which all applications are forcibly closed and the RAM is completely cleared. Registry is restored from persistent memory if a saved copy is available (see 3. 7. 2) and RAM file system is completely erased. You will lose any applications and data (included registry) which are not stored in persistent flash memory. A cold boot is necessary when the Windows CE operating system locks up and the warm boot command does not work. To perform a cold boot, press and hold the following keys simultaneously: Clean Boot A clean boot is a cold boot that causes the device to be restored to factory configuration. The Jet will reset to its factory configuration, clear the working RAM and initialize the file system. You will lose any applications and data stored in persistent flash memory. At the next startup the system will ask to recalibrate the touch screen. 28 USE AND FUNCTIONING 3 To perform a clean boot, follow these steps: 1. Within 1 second press and hold down the Esc and 0 keys until the left orange led starts blinking. Warm Boot Preserved Cold Boot Restored from available) Preserved flash Clean Boot (if Factory default Clean disk Factory default Registry Flash Disk (Backup Preserved Folder) RAM File System Preserved Reinitialized (factory default) Windows Mobile There are several reset methods for the Jet. A warm boot terminates an unresponsive application and clears the working RAM, but preserves the file system. Registry are restored from persistent memory if available or returned to factory default. A cold boot forces all applications to close reinitializing completely the system. Registry are restored from persistent memory if available or returned to factory default. A clean boot restores the Jet to a clean configuration: both the registry and the file system return to a clean status that conform to factory default, unless the user has installed an additional package. Warm Boot A warm boot closes all applications and clears the working RAM, but preserves the file system. Registry are restored from persistent memory if a saved copy is available (see Registry Applet, par. If an application hangs, initiate a warm boot to terminate the application. To perform a warm boot, press and hold the following keys simultaneously: 29 3 DATALOGIC JETTM Cold Boot A cold boot is a complete reset of the Jet in which all applications are forcibly closed and the RAM is completely cleared. Registry is restored from persistent memory if a saved copy is available (see Registry Applet, par. A cold boot is necessary when the Windows Mobile operating system locks up and the warm boot command does not work. [. . . ] The mobile unit (PDA), may roam among the APs in the same subnet while maintaining a continuous, seamless connection to the wired network. Barcode A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in binary form. The general format of a barcode symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. [. . . ]