User manual DAXTEN DOMINION KSX

[. . . ] 1-732-764-8887 E-mail: sales@raritan. com http://www. raritan. com/ Raritan Computer Japan, Inc. Shinkawa NS Building 1-26-2 Shin-kawa, Chuo-ku Tokyo 104-0033 Japan Tel. 81-03-3523-5992 E-mail: sales@raritan. co. jp http://www. raritan. co. jp Raritan Computer France 120 Rue Jean Jaures 93200 Levallois-Perret France Tel. 33-14-756-2061 E-mail: sales. france@raritan. com http://www. raritan. fr Raritan Computer U. K. [. . . ] Ensure that a solid white color covers approximately 15% or more of the target server's desktop. One simple way to accomplish this is to open the Notepad application and maximize its window size. 3. On the RRC Menu Bar, select Video Calibrate Color to perform the color calibration. Remote Desktop: Serial Control In addition to remote KVM console access, Dominion KSX also offers users the convenience of accessing your remote serial devices with the same solution. Any serial console supporting VT100 emulation may be connected to the serial ports found on Dominion KSX, and accessed using the Raritan Remote Client. Remote Connection To open a remote connection to a serial device connected to your Dominion KSX, double-click on the corresponding Navigator entry as displayed by RRC: Serial Port Entry Remote Serial Ports are designated with the following icon: CHAPTER 3: RARITAN REMOTE CLIENT (RRC) 39 A terminal window displaying the console output of the serial device connected to Dominion KSX will appear, and the icon found next to the serial port entry on the RRC Navigator will turn green. Note: Dominion KSX Serial Console access supports only VT100 terminal emulation; be sure your serial device is appropriately configured before connecting to Dominion KSX. Note: If using Windows XP, Service Pack 1, the serial console will not appear if you have two conflicting Java virtual machines installed on your system (i. e. , one from Sun Microsystems, and on from Microsoft). Upon connecting remotely to the selected serial console port, your keystrokes will be transmitted directly to that serial console port. Changing Serial Settings You may change the serial terminal settings such as baud rate, parity, and stop bits used by Dominion KSX to communicate with your serial device, by right-clicking on the serial port entry in the RRC Navigator, and selecting Serial Parameters in the menu. Click on the [OK] button when finished. 40 DOMINION KSX USER MANUAL Viewing Serial Console History The History feature allows you to view the recent history of your console sessions by displaying the console messages to and from the target device. This function displays up to 999 lines of recent console message history. This information can be useful during debugging, troubleshooting, or administering a target device. Note: History data is displayed only to the user who requested the history. Select History from the drop-down menu. Serial Console Logging Raw console data from the target device can be logged to a file in your computer. Choose an existing file or provide a new file name in the File Dialog box. When an existing file is selected for logging, data gets appended to the contents. Select Stop Logging from the drop-down menu. Cutting and Pasting Serial Data Use the Copy, Paste, and Select All Text commands to relocate and / or re-use important text. Position the cursor at the location you wish to paste the text and click once to make that location active. Select Paste from the drop-down menu. CHAPTER 3: RARITAN REMOTE CLIENT (RRC) 41 Remote Desktop: Power Control In addition to remote KVM and serial console access, Dominion KSX also offers users the option of graphical, hard power control. To take advantage of this capability, you should obtain and connect a Raritan remote power control unit to the dedicated "Power Control" port of Dominion KSX (see Chapter 2: Installation, "Physical Connections" for more details). Raritan offers remote power control units in 1U and 0U form factors; offering 8, 12, or 20 outlets; and in configurations for different voltage, international, and load (amp rating) environments. Contact your Raritan representative for more information about Raritan remote power control units. Please note that both the dedicated "Power Control" port and the graphical power control interface described below, only apply and operate with Raritan brand remote power control units. Similar devices from third party vendors will not function as described below with the dedicated "Power Control" port on Dominion KSX, however they of course can be connected to the Dominion KSX serial console ports ­ just as any other serial device. Remote Connection To open a remote connection to initiate remote power control, double-click on the corresponding Navigator entry named "PowerPort", as displayed by RRC: PowerPort entry A window displaying the graphical power control interface (called "PowerBoard"), will appear, and the icon found next to the serial port entry on the RRC Navigator will turn green. Note: If using Windows XP, Service Pack 1, the graphical power control interface will not appear if you have two conflicting Java virtual machines installed on your system (i. e. , one from Sun Microsystems, and on from Microsoft). 42 DOMINION KSX USER MANUAL When the PowerBoard graphical power control interface appears, the user interface allows you to turn an outlet ON or OFF by clicking the icon before the Outlet name or number. To Turn ON a Device or Outlet: Whether or not a device is connected to an outlet, a RED icon before the outlet number indicates the outlet is OFF and there is no power feeding to it. [. . . ] If the problem persists, restore the software and file system from the Recovery CD-ROM. If the problem persists, Delete Memory allocation error. 0009 Could not find the frame rabber card. Memory allocation error. 000A 000B 000C ­ 000F Memory allocation error. ERROR CODE (LAST 4 DIGITS) MEANING RECOMMENDATION restore the software and file system from the Recovery CD-ROM. Power off the system and make sure the frame grabber card is inserted firmly. [. . . ]