User manual DAXTEN PARAGON QUICK GUIDE

[. . . ] ` This page intentionally left blank Copyright © 2002 Raritan Computer, Inc. 1-732-764-8887 E-mail: sales@raritan. com http://www. raritan. com Raritan Computer Europe, B. V. 31-10-284-4049 E-mail: sales. europe@raritan. com http://www. raritan. com Raritan Computer Japan, Inc. Kuga Building 7F 11-6, Kuramae 4-chome Taitoo-ku, Tokyo 111-0051, Japan Tel. [. . . ] Press <F4> while viewing the OSUI to bring up the User Profile Menu. Activate the OSUI by rapidly hitting the default Hot Key activator (the <Scroll Lock> key) twice. User Connected: User: Susan Profile UMT8 Switch HWII User Port: 1 Admin: No Group: 45 Scan Mode: Global Global Scan Rate: 03 Seconds ID Display: On 03 Seconds Green Mode: Off 05 Minutes Hotkey: Scroll Lock Display Position: Menu ID Previous Channel Key: NumLck Help: Single Line LocalPC: Off . . . . . ScrlLock | Scan | Skip | NCSL Figure 40 User Profile Menu User Profile Menu Fields: · Connected field displays name and Channel ID number of selected device or computer, if user is currently connected to a channel. · User Port field displays Paragon switch user port to which user is connected. · Admin field displays user's administrator privileges, if any. Press the < > and < > or <Page Up> and <Page Down> keys to highlight a channel for a device or computer and press <Enter> to select. Please refer to the section "User Profile Menu Options" that follows for instructions on interpreting and editing the menu components. When editing is complete, press <Enter> - the highlight will turn yellow. Press <S> to save changes, or <Esc> to cancel changes. CHAPTER 3: OPERATING PARAGON Changing Passwords within User Profile Menu: 1. To add, delete, or change a password, press <P> while viewing the User Profile Menu. Press <Enter> to retain change or press <Esc> to cancel changes. Note: If <Esc> or any of the function keys are pressed accidentally, the system prompts the user with an opportunity to save any changes before exiting. 53 User Profile Menu Options: 1. Scan Mode: Use the < > and < > or < > and < > keys to toggle between Global and Individual. Global Scan Mode scans each channel for the same amount of time, indicated by the Global Scan Rate. Individual Scan Mode scans each channel for the specified time as shown in Selection Menu. (Setting the channel's individual scan rate is an administrator function). Global Scan Rate: Type a number from 01 to 24, or use < > and < > keys to change the rate number. ID Display: The ID Display is a small window that shows computer name and Channel ID number when switching or scanning between channels. The two fields of control are: · · On/Off: Use the < > and < > or < > and < > keys to toggle between On and Off. Time: Type a number from 01 to 24 or use the < > and < > keys to change the number. When a time beyond 24 is chosen, a dash "--" will be displayed, indicating the ID window will be shown all the time. Green Mode (PowerSave Mode): Blanks screen if user console is idle for a pre-specified amount of time. The two fields of control are: On/Off: Use the < > and < > or < > and < > keys to toggle between On and Off. [. . . ] Click on the Check Device Information button to confirm successful communication with the Paragon Matrix Switching unit, and to confirm that the firmware upgrade is applicable. Note: During the firmware uploading process, the User Station and the computer must be powered ON, and the serial cable must remain firmly connected. Use the power switch on the back of the unit to recycle power to the Paragon Matrix Switching unit. The front LCD screen will display the latest firmware version number. 5. [. . . ]