User manual DENON AVR-1708
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DENON AVR-1708. We hope that this DENON AVR-1708 user guide will be useful to you.
You may also download the following manuals related to this product:
DENON AVR-1708 (6032 ko)
DENON AVR-1708 (5995 ko)
DENON AVR-1708 AUTRE NOTICE (6029 ko)
Manual abstract: user guide DENON AVR-1708
Detailed instructions for use are in the User's Guide.
[. . . ] AV SURROUND RECEIVER
AVR-1708
Owner's Manual Manuel de l'Utilisateur
ENGLISH FRANCAIS
n SAFETY PRECAUTIONS
1.
SAFETY INSTRUCTIONS
Read Instructions All the safety and operating instructions should be read before the product is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. [. . . ] (The HDMI audio signal is output from the monitor. ) At this time, set the input mode to "Auto" . IN connectors are not output to the monitor.
Operations (vpage 22)
ENGLISH
j iPod Assign
Assign Control Dock for iPod to this source.
k ~ A0 Component In Assign
Select component video input to assign to this source.
A5 Audio Delay
Compensate for mismatched timing between video and audio.
Getting Started
[Display]
1. Sp 2. In 3. Op
W
[Display]
1. Sp 2. In 3. Op
W
[Display]
1. Sp 2. In 3. Op
W
Connections
Input Setup
W
Input Setup
W
Input Setup
W
7 iPod
VCR
8 COMP1
DVD
15A. Delay 0ms
Delay audio. This sets the delay time for audio signals.
Setup
[Assignable input sources] CD AUX CDR DVD/HDP TV/CBL VCR V. AUX
[Input terminals] Component video1 Component video2 Component video3 [Assignable input sources] DVD/HDP TV/CBL VCR V. AUX
Component video2 TV/CBL Component video3 VCR
Playback
[Variable range]
0 ms
~ 200 ms
With the default settings, the Control Dock for iPod can be used connected to the VCR (iPod) connector.
With a movie source, for example, adjust so that the movement of the actors' lips is synchronized with the sound.
Remote Control
Input terminals Default setting
Component video1 DVD/HDP
This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front Speaker" set to "Large" "Tone Defeat" to , "ON" and "Room EQ" to "OFF").
Multi-Zone
A1 ~ A4 Video Convert
Automatically convert video input signal to monitor output format.
A6 EXT. Select according to the player in use.
Information
[Display]
1. Sp 2. In 3. Op
W
[Display]
1. Sp 2. In 3. Op
W W
Troubleshooting
Input Setup 11 DVD:Conv ON
Input Setup
W
16EXT. In SW +15
[Input source]
DVD/HDP
TV/CBL
VCR
V. AUX
[Selectable items] 0dB +5dB +10dB :
Select according to the player in use.
[Selectable items] ON OFF
: Enable conversion. : Disable conversion.
+15dB :
This is the recommended level.
Operations (vpage 22)
ENGLISH
A7 Auto Preset Memory
Use the auto preset function to program radio stations.
Terrestrial
Indicate terrestrial signal strength.
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
[Display]
1. Sp 2. In 3. Op
W
Display
Condition
For details, see "Amp Assign / Multi-zone Connections and Operations" (vpage 47 48). ,
Input Setup
W
Signal strength is strong Signal strength is good Signal strength is marginal Signal strength is weak No signal
s ~ f Volume Control
Set the main zone volume setting.
17 Preset <Start
Press the o button to start. · "Completed" appears once searching is completed.
[Display]
1. Sp 2. In 3. Op
E
Option Setup
Make various other settings. a s~f g ~ A1 A2 A3 A4 A5 Amp Assign Volume Control 2ch Direct/Stereo Custom Auto Surround Mode Room EQ Setup Direct Mode Setup Remote ID Setup
Option Setup
E
2 Limit 3 P. On 4 Mute
OFF
E
If an FM station cannot be preset automatically, select the desired station by tuning it in manually, then preset it manually.
LAST
E
FULL
A8 Antenna Aiming
Adjust the XM radio reception sensitivity.
Volume Limit
[Display]
1. Sp 2. In 3. Op
W
a Amp Assign
Define how the amplifier for the surround back speaker channels is used.
Make a setting for maximum volume.
[Selectable items] OFF
: Do not set a maximum volume.
Input Setup
W
[Display]
1. Sp 2. In 3. Op
W E
20dB : Set the maximum volume to 20 dB. 0dB
E
18 Ant Aiming< SAT:4 < TER:3 >
W
: Set the maximum volume to 0 dB.
Option Setup 1 Amp ZONE2
The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the main zone) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections).
Satellite
Indicate satellite signal strength.
[Selectable items] 7. 1ch ZONE2 FrontA Bi-Amp FrontB Bi-Amp
Operations (vpage 22)
ENGLISH
Power On Level
This sets the volume set when the main zone's power is turned on.
g ~ A1 2ch Direct/Stereo Custom
Make speaker settings for 2-channel mode playback.
Front
Select front speaker size.
Getting Started
[Selectable items] Last
: Use the memorized setting from the last session. in units of 1 dB.
[Display]
1. Sp 2. In 3. Op
E
[Selectable items] Large Small : Select front speaker size.
Connections
80dB ~ +18dB : Set the volume level when the power is turned on
Option Setup
E
Subwoofer
Select subwoofer use.
5 2ch Cstm 5 2ch Cstm 6 2ch F 7 2ch SW
OFF
E
[Selectable items] Yes
E
Setup
Mute Level
This sets the amount of attenuation of the volume when the mute mode is set in the main zone.
ON Large
E
No
: Select subwoofer use.
Playback
[Selectable items] Full
: The sound is cut off entirely.
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
Yes
E
Remote Control
40dB : The sound is attenuated by 40 dB. 20dB : The sound is attenuated by 20 dB.
8 2ch LFE 9 2ch FL 10 2ch FR 11 2ch Freq
Norm
E
[Selectable items] LFE (Normal) LFE+Main : Select subwoofer signal.
12ft
E
12ft
E
Distance FL
Set distance from listening position to front left speaker.
Multi-Zone
80
[Variable range]
0ft ~ 60ft
Setting
To change the settings, select "ON" .
Distance FR
Set distance from listening position to front right speaker.
Information
[Selectable items] OFF ON
: Use the same settings as in "Speaker Setup" . : Make separate settings for 2-channel mode.
[Variable range]
0ft ~ 60ft
Troubleshooting
Crossover
Select crossover frequency from which subwoofer handles low range signal.
[Selectable items] 40Hz 200Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 250Hz : Select crossover frequency.
Operations (vpage 22)
ENGLISH
A2 Auto Surround Mode
Make setting for memorizing surround mode setting for each input signal type.
A4 Direct Mode Setup
Select room EQ use for DIRECT mode.
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
[Display]
1. Sp 2. In 3. Op
E
[Display]
1. Sp 2. In 3. Op
E
Surround Modes
Option Setup
E
Option Setup
E
Standard Playback
This is the standard mode for enjoying surround sound according to the program source.
14 Direct
OFF
12AutoSurr. ON
[Selectable items] [Selectable items] ON OFF
: Memorize settings. Surround mode does not change according to input signal.
ON OFF
: Use room EQ. : Do not use room EQ.
Surround Playback of 2-channel Sources
To select these surround modes using the SELECT/ENTER knob on the main unit or press the STD button on the main remote control unit. n When using a surround back speaker
A5 Remote ID Setup
Set remote control ID.
[Selectable items] DOLBY PLgx DTS NEO:6
n When not using a surround back speaker
neural
The auto surround mode function lets you store in the memory the surround mode last used for playing the three types of input signals listed below. qAnalog and PCM 2-channel signals (STEREO) w2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLgx Cinema) eMulti-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY/DTS SURROUND) b Default settings are indicated in ( ).
[Display]
1. Sp 2. In 3. Op
E
[Selectable items] DOLBY PLgx
or DOLBY PLg
E
DOLBY PLg
DTS NEO:6
neural
Option Setup 15 Remote ID 1
: The signals are decoded in DOLBY PLgx or DOLBY PLg for playback. "
Cinema Music
[Selectable items]
1
2
3
4
Game
A3 Room EQ Setup
Select room EQ setting method.
NOTE
When using the AVR-1708 with only the included remote control unit (RC-1075), there is no need to make settings. When using a separately sold remote control unit (RC-7000CI, etc. ), this function can be used. Match the ID setting of the remote control unit and the receiver.
E
Pro Logic : This is the Pro Logic playback mode. [. . . ] Page 10 ~ 17
Getting Started Connections
30
No sound is produced from subwoofer.
· The surround back speaker's power amplifier is assigned to a different channel. · Surround mode not set to a mode for 6. 1- or 7 . 1-channel playback. · The "Subwoofer" setting at "Speaker Setup" is set to "No" . · The subwoofer's volume is turned off.
· Check the setting and change it as necessary. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DENON AVR-1708
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DENON AVR-1708 will begin.