Detailed instructions for use are in the User's Guide.
[. . . ] AV SURROUND RECEIVER
AVR-3805
OPERATING INSTRUCTIONS
CH SEL ENTER
2 We greatly appreciate your purchase of the AVR-3805. 2 To be sure you take maximum advantage of all the features the AVR-3805 has to offer, read these instructions
carefully and use the set properly. Be sure to keep this manual for future reference, should any questions or problems arise.
"SERIAL NO. PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE"
2 SAFETY PRECAUTIONS
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ATTENTION
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). [. . . ] CD player (CD) system buttons
[SURROUND MENU] · Operate the surround mode.
[10KEY / SYSTEM CALL MENU] · Operate the 10KEY or SYSTEM CALL mode.
6, 7 2 1 8, 9 3
DISC SKIP + 0~9, +10
: Manual search (forward and reverse) : Stop : Play : Auto search (to beginning of track) : Pause : (for CD changers only) : 10 Key
51
2. Tuner system buttons
6 7 2 1 3 0
A/B
: : : : : : :
Rewind Fast forward Stop Forward Play Pause Reverse Play Switch between sides A and B
3. MD recorder (MD), CD recorder (CDR) system buttons
TUNING +, : BAND : MODE : MEMORY : SHIFT : CHANNEL +, : CHA~G : 1~8 :
Tuning up/down Switch between AM and FM bands Switch between AUTO and MANUAL Preset memory Switch preset channel range Preset channel up/down Preset channel range Preset channel
6, 7 2 1 8, 9 3
0~9, +10
: : : : : :
Manual search (forward and reverse) Stop Play Auto search (to beginning of track) Pause 10 Key
52
Preset memory
The included remote control unit can be used to operate devices of different brands by registering the preset number corresponding to the brand of your device. For some models the remote control unit or the device may not operate properly. In this case, use the learning function (page 56) to store your device's remote control signals in the included remote control unit. For instructions on resetting the preset memory, see page 60.
1
Press the power ON button and the OFF button at the same time.
1 5 3
2
Press the "1"button to select preset memory. · Setup List
1: 2: 3: 4: 5: 6: Preset memory Learning setup System call Punch through Light setup Reset
2, 4
3
Press the Mode button for the component you want to preset, then press ENTER button.
CH SEL ENTER
3
4
Referring to the included List of Preset Codes, use the number buttons to input the preset code (a 4-digit number) for the manufacturer of the component whose signals you want to store in the memory.
5 6
"OK" is displayed when the signals are registered and the mode is terminated. "FAIL" is displayed when the signals are not registered, repeat steps 1 to 5. To store the codes of another component in the memory, repeat steps 1 to 5.
NOTES: · Depending on the model and year of manufacture, this function cannot be used for some models, even if the your device is listed on the included list of preset codes. · Some manufacturers use more than one type of remote control code. Refer to the included list of preset codes to change the number and check it out. The preset codes are as follows upon shipment from the factory and after resetting: TV, VCR1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HITACHI CD, MD, TAPE, CDR, VDP, DVD, DVDR. . . . . . . . . . . . . . . . . . . . . . DENON VCR2, DBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SONY CABLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABC
53
Operating a component stored in the preset memory
1
Press the mode selector button for the component you want to operate.
1
NOTE: · For the DVD player remote control buttons, function names may differ according to manufacturer. Compare with the remote control operation of the various components.
2. · For details, refer to the component's operating instructions. Digital video disc player (DVD), Digital video disc recorder (DVD R) system buttons SOURCE ON : Power on SOURCE OFF : Power off (DENON DVD only) 6, 7 : Manual search (forward and reverse) 2 : Stop 1 : Play 8, 9 : Auto search (to beginning of track) 3 : Pause DISC SKIP + : Disk skip (for DVD changers only) SETUP : Setup TOP MENU : Top menu MENU : Menu RETURN : Return ·, ª, 0, 1 : Cursor up, down, left and right ENTER : Enter AUDIO : Switch the audio language DISPLAY : Display SUBTITLE : Switch the subtitle ANGLE : Switch the angle 0~9, +10 : 10 key
SOURCE ON : 6, 7 : 2 : 1 : 8, 9 : 3 : 0~9, +10 :
Power on/Standby Manual search (forward and reverse) Stop Play Auto search (cue) Pause 10 key
54
3. Monitor TV (TV), digital broadcast satellite (DBS) tuner and cable (CABLE) system buttons
SOURCE ON : 6, 7 : 2 : 1 : 3 : 0~9, +10 :
Power on/Standby Manual search (forward and reverse) Stop Play Pause 10 key
SOURCE ON : 6, 7 : SETUP : TOP MENU : MENU : RETURN : ·, ª, 0, 1 : ENTER : DISPLAY : Channel +, : 0~9, +10 : TV/VCR : VOL +, :
Power on/standby Manual search (forward and reverse) Setup Top menu Menu Return Cursor up, down, left and right Enter Switch display Switch channels +, 10 key Switch between TV and video player Volume up/down
55
Learning function
If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the accessorious remote control unit by storing its remote control signals in the remote control unit. For some remote control signals it is not possible to "learn" the signals or the device will not operate properly. In such cases use the remote control unit included with the device to operate it.
1 2
Press the power ON button and the OFF button simultaneously.
1, 8
Press the "2" button to select Learning setup.
3, 7
2
3
Press the Mode button for the component you want to learned, then press the ENTER button. Learning is not possible for the AMP, ZONE2, and ZONE3 modes.
CH SEL ENTER
3
4
Buttons that allow learning will light. The display will go off and the unit will enter the learning standby mode. · To cancel, press the power ON button and the OFF button simultaneously.
6 7 5
Point the remote control units directly at each other and press and hold in the button on the other remote control unit which you want to "learn".
Other remote control unit
"OK" appears on the remote control unit's display and learning is completed. · Other keys can be "learned" by repeating steps 5 to 6. [. . . ] Use this function when using multiple surround speaker combinations for more ideal surround sound. Once the combinations of surround speakers to be used for the different surround modes are preset, the surround speakers are selected automatically according to the surround mode.
Surround mode DOLBY/ DTS CINEMA DOLBY/ DTS MUSIC DOLBY/ PL IIx GAME
Default settings Front Sp. Large Front L & R 12 ft (3. 6 m) Front L 0 dB Front R 0 dB Center Sp. Small Center 12 ft (3. 6 m) Center 0 dB Subwoofer Yes Subwoofer 12 ft (3. 6 m)
Surround L Surround R
1
Surround Sp. [. . . ]