User manual DIGITECH MULTI CHORUS

[. . . ] Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Some information contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since this version of the manual was completed. The information contained in this version of the owner's manual supersedes all previous versions. DigiTech has long been known as a leader in the guitar signal processing industry. The Multi Chorus is a culmination of this expertise, bringing you a breakthrough in chorus effect technology. Thanks to our proprietary AudioDNATM processor, the Multi Chorus is the only pedal that provides up to16 independent voices of interactive chorusing. The result is a lush wash of modulation that rivals any of the finest pedal and rack chorus devices you have ever heard. Turn this knob clockwise to increase the output level, and counter-clockwise to decrease the output level. Turn this knob clockwise to increase the rate, and counter-clockwise to decrease the rate. Use the proper supply for your area's Mains line voltage. 1 234 5 11 10 9 6 7 8 4. Turn this knob clockwise to increase the depth for a thick chorus sound, and counter-clockwise to decrease the depth for a shallow, light chorus sound. At the knob's minimum position, only a single chorus voice is present. At the maximum position of the Voice knob, 16 voices are heard interacting with one another. Connecting a guitar cable to this jack supplies battery power even though the Indicator LED may not be lit. To prolong battery life, disconnect all cables from the pedal when not in use. Pedal Release Pins These two pins are spring-loaded hinges that hold the pedal in place. Push these pins in to release the pedal from the pedal chassis exposing the battery compartment. Out 1(Mono) Jack Connect this output to a single guitar amplifier when only one amp is being used. If the LED becomes dim or does not light when the cables are connected, the battery needs to be replaced. Out 2 Jack Connect this output to a second amplifier for true stereo chorusing. Stereo is the best way to get the most effective chorusing experience from the Multi Chorus pedal. Connections The Multi Chorus has a single input and a pair of outputs. Out 1 is used if the Multi Chorus is being connected to only one amplifier. [. . . ] Make sure the battery cable does not interfere with the spring or pedal switch arm. Push the opposite pin in and lower the other side of the pedal into place over the depressed pin. When the pedal is properly fastened, both release pins are flush with the outer side of the pedal. SPECIFICATIONS: · Controls - Level, Speed, Depth, Voice, On/Off Pedal · Jacks - Input, Out 1 (Mono), Out 2 · Input Impedance - 1 MOhms · Output Impedance - 100 Ohms · Power Supply - 9V Alkaline Dry Battery · Power Consumption - 4. 8Watts (w/optional PS200R power supply) · Battery Life - Approximately 4 hours (with continuous usage) · Dimensions - 4 15/16"(L) x 3 1/8"(W) x 2 1/8"(H) · Weight - 1. 38 lbs. [. . . ]