User manual DOMENA CR 3 ECOFIBRES DATASHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DOMENA CR 3 ECOFIBRES. We hope that this DOMENA CR 3 ECOFIBRES user guide will be useful to you.
You may also download the following manuals related to this product:
DOMENA CR 3 ECOFIBRES DATASHEET (270 ko)
DOMENA CR 3 ECOFIBRES DATASHEET (506 ko)
Manual abstract: user guide DOMENA CR 3 ECOFIBRESDATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ]  Do not use the iron if it is damaged, if it leaks, or if the power cable is damaged. Contact your nearest After Sales Service dealer for servicing or repair  Great care must be taken when ironing in the presence of children.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.  To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. [. . . ] Remove, shake it for a few seconds and wait for the resultant colour change (approximately 1 minute). 2 or more mauve squares : we advise you to use distilled water for irons. It is not necessary to switch off or unplug your ironing centre when refilling. ⷠRemove the anti-scale cartridge from the water tank and fill it. To obtain steam, the anti-scale cartridge must be inserted into the water tank. We recommend that you iron articles in the order indicated on the iron's thermostat dial so that the temperature gradually increases. To use steam please ensure that the thermostat dial is set within the 2 and 3 dot settings. The volume of steam increases gradually as you turn the control knob towards the maximum. ⷠAt maximum setting, there is an initial burst of steam lasting for several seconds. To repeat this process, wait for a few seconds to avoid any risk of spotting. please note · Because of the high steam output rate, there is no need to continually press the steam button. Pressing the button briefly and frequently will enable you to control the quantity of steam, in order to obtain professional results. ⷠIf the iron is used intensively, steam may continue to be produced after the steam button has been released and water may appear on the iron holder. ⷠYou should turn the steam output dial to the middle setting when - the unit is used for the first time, - the water tank has been refilled, - the anti-scale cartridge has just been changed. It is recommended that you use the ECO function when the garments are only slightly creased, have come out of a tumble dryer and whenever you think suitable. In this way you will be obtaining maximum economy in the use of water and electricity, up to 50% in electricity and 70% in water. The illuminated pilot light will confirm that this mode is operational. When you switch on the iron, it may take up to 30 seconds before you can call for steam. The steam output will remain at a reduced level until the generator light goes out, by which time it will have reached the normal level. Please note : Whilst you are ironing, the generator and iron heating pilot lights repeatedly go on and off. In this way it eliminates the risk of condensation forming and so guarantees the perfect drying off of garments. The foam cover remains dry even after prolonged steaming from the iron. [. . . ] Press the steam button - Go to your local approved service dealer - Put the dail to the settings GG  GGG - Wait for the steam generator light to go out. - Press the steam button several times - Go to your local dealer - Fill the reservoir - Insert the reservoir and push it fully in - Go to your local approved service dealer - Remove the container and check that the anti-scale cartridge has been correctly inserted - Set the switch to - Reconnect the generator unit at the base - Reconnect the generator unit at the base The suction or blowing functions do not work - The selector switch is at - The generator unit has not been reconnected at the base after having been detached from the table The table does not heat up - The generator unit has not been reconnected at the base after having been detached from the table UNITED KINGDOM Thank your for choosing this product from DOMENA. It is built to the highest standards and we hope it will give you many years of trouble-free service. One-Year Product Guarantee Your DOMENA appliance will be repaired free of charge for one year from the date of purchase if it fails to work properly because of the materials or workmanship we have used, subject to the following conditions: Delivery to and from our authorised service agents will be at your risk and cost. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DOMENA CR 3 ECOFIBRES
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DOMENA CR 3 ECOFIBRES will begin.