User manual DOMENA XL PRO 90 ECOFIBRES DATASHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DOMENA XL PRO 90 ECOFIBRES. We hope that this DOMENA XL PRO 90 ECOFIBRES user guide will be useful to you.
You may also download the following manuals related to this product:
DOMENA XL PRO 90 ECOFIBRES DATASHEET (319 ko)
Manual abstract: user guide DOMENA XL PRO 90 ECOFIBRESDATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ]  If an extension lead is absolutely necessary, a 10 amp cable should be used.  Use a mains supply which has an earth connection, for your own safety.  Never immerse the machine in water or other liquids, not even partially. [. . . ] ⷠOnce the appliance is ready, press the steam trigger until steam comes out. When you switch on the iron, it may take up to 90 seconds before you can call for steam. The steam output will remain at a reduced level until the generator light goes out, by which time it will have reached the normal level. Please note : Whilst you are ironing, the generator and iron heating pilot lights repeatedly go on and off. Adjust the flow control knob to suit the type of material being ironed. The volume of steam increases gradually as you turn the control knob towards the maximum (+). ⷠAt maximum setting, there is an initial burst of steam lasting for several seconds. To repeat this process, wait for a few seconds to avoid any risk of spotting. please note · Because of the high steam output rate, there is no need to continually press the steam button. Pressing the button briefly and frequently will enable you to control the quantity of steam, in order to obtain professional results. ⷠIf the iron is used intensively, steam may continue to be produced after the steam button has been released and water may appear on the iron holder. ⷠSelect maximum steam output when : - the unit is used for the first time, - the water tank has been refilled, - the anti-scale cartridge has just been changed. To ensure regular steam output performance, your unit is equipped with a pump which is activated each time the steam trigger is pressed. : - the appliance is used for the first time - the water tank is empty - the anti-scale cartridge has just been changed. Your iron can also be used vertically to steam clothing on hangers or curtains in situ etc. ⷠMove the iron from top to bottom, keeping the steam button pressed. ⷠYou can put it down where you wish to rest the iron on. ⷠTo put the ironing rest back on the unit, slide it gently into the guides on the housing. [. . . ] - Power supply problem - Appliance not plugged in or On/Off button not pressed - Other - Thermostat dial at the off position - Other - When you call for steam right at the start, - if it seems slow in coming through just keep your finger on the steam trigger until it does arrive. - The reservoir is empty - Fill the reservoir - The reservoir is incorrectly inserted or has not been inserted. - Insert the reservoir and push it fully in - The anti-scale cartridge has not been inserted - Insert an anti-scale cartridge into the reservoir - The pilot light flashes - Change the anti-scale cartridge. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DOMENA XL PRO 90 ECOFIBRES
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DOMENA XL PRO 90 ECOFIBRES will begin.