User manual DYNACORD D15-3 DATASHEET

[. . . ] Cabinet Configuration Nominal impedance Rated power RMS Program power Peak power SPL 2, 83 V / 1m 1W / 8 Ohm Max. [. . . ] The midrange is projected from the ultra-low distortion DYNACORD DND 6120 Neodymium cone transducer with a conical radiation pattern of 120°. The Constant-Direcctivity HF horn has been integrated into the baffle by CAD methods. The maximum sound pressure level is 133dB, the frequency range of the D15-3 is 50Hz to 20kHz. the D15-3 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in high-performance small-format active and passive satellite systems. D15-3s can also be used with appropriate passive subwoofers with built-in passive low pass filters. the D15-3 can be connected directly to the sub and no additional sub amp or external crossover network is required. Every transducer is protected against thermal overload with an electronic circuit called VOICE COIL TRACKING PROTECTION or halogen protectors. This circuit senses the terminal voltages of the transducers and simulates the thermal behaviour of the tranducers' voice coil. [. . . ] The recessed mounted SPEAKON-type connectors allow hazzle-free operation of the D15-3 cabinet even when space matters. [. . . ]