User manual DYNACORD POWERMATE 600

[. . . ] The integration of mixing console, power amplifier and effects devices in a compact and modern unit reaches a new high with the PowerMate 600. [. . . ] With six Mic/Line and two Stereo/Line channels, three-band EQ in every channel, separate effects and monitor sends, a 7band master equalizer and LED level meters in the master as well as every channel, the Power Mate 600 is a joy to use in any situation. Despite its compact dimensions, the PowerMate 600 is rated at 2 x 300 watts into 4 ohms and therefore offers large dynamic reserves with exceptionally low distortion and intermodulation values. Two parallel and individually controlled 24-bit stereo digital effects devices with 48-bit algorithms offer a total of 198 live-optimised presets in studio quality. Technical Specifications PowerMate600 Mixing desk in rated condition, Unity Gain (MIC Gain 20 dB), all faders position 0 dB, all pots in mid position, master fader + 6dB, amplifier rated output power into 8 Ohms, dual channel, unless otherwise specified. Maximum Midband Output Power, 1 kHz, THD=1%, Dual Channel into 4 Ohms into 8 Ohms Rated Output Power, THD=0. 1%, Single Channel into 4 Ohms into 8 Ohms Maximum Midband Output Power, 1 kHz, THD=1%, Single Channel into 4 Ohms into 8 Ohms Maximum Output Voltage of power amplifier, no load THD at 1kHz, MBW=80kHz MIC input to Main L/R output, +16 dBu, typical Power amplifier input to Speaker L/R output DIM 30, power amplifier IMD-SMPTE, power amplifier, 60Hz, 7 kHz Frequency Response, -3dB ref. [. . . ] Position MIC input LINE Input (Mono) LINE Input (Stereo) Power Amplifier Input Maximum Level, mixing desk MIC inputs Mono Line inputs Stereo Line inputs All other inputs Record Send output All other outputs Input Impedances MIC Insert Return EQ Input and 2 Track Return All other inputs Output Impedances Record Send Phones All other outputs Equivalent Input Noise, MIC Input, A-weighted, 150 Ohms Noise, Channel inputs to Main L/R outputs, A-weighted Master fader down Master fader 0 dB, Channel fader down Master fader 0 dB, Channel fader 0 dB, Channel gain unity Signal/Noise-Ratio, power amplifier, A-weighted Equalization LO Shelving MID Peaking, mono inputs MID Peaking, stereo inputs HI Shelving Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz Power Consumption at 1/8 maximum output power, 4 Ohms Dimensions, (WxHxD), mm Weight, without lid Optional RMK-600 (Rack-Mount-Kit PowerMate600) FS11 (Footswitch) Subject to change without prior notice. [. . . ]