User manual EBENCH KH 2245

[. . . ] You will find the addresses of our service partners on the warranty card. The warranty card is included in delivery of the radio. ô Note: No liability will be taken and no guarantee will be made for damages . . . Ú Ú due to opening the case of the radio resulting from repair attempts not made by qualified experts Ú use of the radio for purposes other than intended!ô Note: Battery acid could leak out, especially if the batteries are old. Therefore you should remove all batteries if you do not plan to use the radio for long periods of time. [. . . ] This could cause a fire! | Warning! Do not hang the radio in areas exposed to extreme physical shock or constant vibrations. Physical shock and constant vibrations could lead to malfunctions and longterm damage. English 10 7. Receiving radio stations To receive a radio station: 1 Turn the radio on by turning the volume control knob clockwise. To do this, you have to turn the knob until it stops. 2 Switch the frequency range selection switch to the frequency range FM (frequency modulation) or AM (medium wave) as desired. Search for a radio station with good reception by turning the tuning knob. Improving radio station reception The radio has an integrated antenna for radio reception. Simply turn the radio until reception of the radio station has improved. 8. Turning the radio off Turn the volume knob counterclockwise until it stops. 9. Setting the date and time The time is displayed even when the radio is turned off. Please note that the alarm function only functions properly if the clock has been adjusted to the correct time. English 11 To set up the date: 1 2 3 4 English 12 Press the Mode button four times. You can set the desired day by repeatedly pressing the Set button. To set the time: 1 Press the Mode button again. The hour display will appear on the display screen and on the right side an A, P or H will be displayed. You can select whether you want to use the clock in 24-hour or 12-hour display mode. If an A or a P is displayed on the right side, then the 12-hour (AM/PM) display mode, as common in the USA, is currently active. If P is displayed, then PM will be shown to the left of the hour display on the screen. If an H is displayed on the right side, then the 24hour display format, as common in most European and Asian countries, is currently active. 2 3 4 You can set the desired hour by repeatedly pressing the Set button. You can set the desired minute by repeatedly pressing the Set button. English 13 5 6 Once you have selected the right minute, press the Mode button. Press the Set button repeatedly until the colon blinks again on the display screen. Using the alarm function The alarm function is used to play an alarm sound at a preprogrammed time. Upon briefly pressing the Set button, a sound symbol will appear to the left of the time display. Setting the alarm time 1 To set the desired alarm time: Press the Mode button again. [. . . ] Search for a radio station with better reception by turning the tuning knob. 11. 3. No sound Increase the volume by turning the volume control knob. 11. 4. Other malfunctions Please contact your nearest service partner if . . . English 17 Ú Ú the malfunctions described in sections 11. 1. can not be rectified as described or other malfunctions occur upon operating the radio. You will find the addresses of our service partners on the warranty card delivered with the radio. | Warning! The radio contains no user-serviceable parts. [. . . ]