User manual ELECTRO-VOICE AGSE ADAPTOR GRID
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ELECTRO-VOICE AGSE ADAPTOR GRID. We hope that this ELECTRO-VOICE AGSE ADAPTOR GRID user guide will be useful to you.
Manual abstract: user guide ELECTRO-VOICE AGSE ADAPTOR GRID
Detailed instructions for use are in the User's Guide.
[. . . ] X-Line Very Compact AGSE Adapter Grid User Instructions
AGSE Grid
AGSE Adapter Grid
The AGSE Adapter Grid allows for the flexibility of integrating an XLE Array with an X-Line Very Compact Subwoofer Array. [. . . ] Consult the XLVC Rigging manuals, and/or the rigging label on the XLVC systems for the ratings when used in curved arrays. The Adapter Grid has been designed to exceed the structural ratings for the XLVC loudspeaker systems, so if the structural ratings are not exceeded for loudspeaker system within the column, the structural rating for the Adapter Grid will not be exceeded.
XLD Grid
XLE Series Loudspeaker XLVC-BGK Bottom Grid Kit (Set of 2 Hinge Bars and Swing Arms along with 8 Pins)
XLVC Subwoofer
Note: XLVC-BGK Sold Separately AGSE Adapter Grid XLVC-BGK Bottom Grid Kit (Set of 2 Hinge Bars and Swing Arms along with 8 Pins) XLVC Subwoofer
AGSE Adapter Grid
XGS-4 Groundstack
XLE Series Loudspeaker
Figure 1: Using the AGSE for Flying Arrays
Figure 2: Using the AGSE for Groundstacking
These configurations are showing the maximum number of enclosures allowed, based on the measured maximum working loads of the rigging systems. They also show the proper balance for safety and acoustical performance. Other configurations are allowed at customer's discretion without exceeding the maximum loads and angles of the systems in use. For all configurations approaching these maximums, and all configurations used outdoors, use the following For Flying Configurations In outdoor venues when wind is present, to prevent the system from shifting or twisting with the wind, use a secondary rigging or anchoring point to pullback or lockdown the array. Please use an XLE GRID and an XLVC-BGK bottom grid kit and follow instructions found on XLVC-BGK. [. . . ] For customer orders, Contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice.
Electro-Voice®
12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043
www. electrovoice. com
© Bosch Communications Systems Part Number LIT000152 Rev A 01/2008 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE AGSE ADAPTOR GRID
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE AGSE ADAPTOR GRID will begin.