Detailed instructions for use are in the User's Guide.
[. . . ] TM
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP. , PARSIPPANY, NEW JERSEY, U. S. A.
EWL15D6
(15 inch)
If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call TOLL FREE : 1-800-256-2487. Or visit our WEB SITE at http://www. EmersonAudioVideo. com
PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). The caution marking is located on the rear of the cabinet.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
IMPORTANT SAFEGUARDS
1. [. . . ] 2 The disc goes forward by one frame each
time [PAUSE F] is pressed.
PAUSE
3 To exit step by step playback, press [PLAY O].
PLAY
19
EN
DVD SECTION
PLAYING A DISC
STEP BY STEP PLAYBACK
FAST FORWARD / FAST REVERSE 1 During playback, press [FWD g] or
[REV h].
REV FWD
ZOOM
The Zoom function allows you to enlarge the video image and to pan through the enlarged image.
1 Press [ZOOM] during playback.
ZOOM
SLOW
· " g 1" or "h 1" appears on the screen. 2 To select another speed, repeat step 1 until
your required speed number appears on the screen.
· Playback will continue. 2 Press [ZOOM] repeatedly to select the
required zoom factor: ZOOM1, ZOOM2, ZOOM3 or OFF.
ZOOM
· For DVDs, fast forward/reverse search speed is different depending on the disc. Approximate speed is 1(×2), 2(×8), 3(×20), 4(×50) and 5(×100). · For Audio CDs, approximate speed is 1(×2), 2(×8) and 3(×30). 3 To return to normal playback, press [PLAY O].
PLAY
3 Press [K], [L], [s] or [B] to move the
zoomed picture across the screen.
4 To exit zoom mode, press [ZOOM] to OFF.
ZOOM
SLOW FORWARD / SLOW REVERSE 1 During playback, press [PAUSE F].
PAUSE
2 Press [FWD g] or [REV h].
REV FWD SLOW
NOTE Zooming function does not work while disc · menu is shown. · The picture may be distorted if you operate other functions repeatedly (ex. [PAUSE F] or [REV h], etc. ) in the zoom mode.
·"
1" or "
1" appears on the screen.
3 To select another speed, repeat step 2 until
your required speed number appears on the screen. Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
4 To return to normal playback, press [PLAY O].
PLAY
EN
20
SEARCH FUNCTION
1 4 7
SLEEP
2 5 8 0
SKIP
3
CH.
2 Within 30 seconds, select the desired track
number using the Number buttons.
1 4 7 2 5 8 0
MUTE
6 9
+100
VOL.
3 6 9
+10
ZOOM
· To select single-digit track number, press [0]
PLAY REV STOP PAUSE SLOW DISC MENU FWD
first if the total number of track in the disc is 10 or more. Press [0] [3] for track number 3. ) · Playback will start at the selected track.
Using [SKIP H / G]
During playback, press [SKIP G] to move the next track. · If [SKIP H / G] is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTE [SKIP H / G] are not operative when · playback is stopped.
DISPLAY ENTER SETUP TITLE RETURN
CLEAR SEARCH MODE REPEAT
A-B
· Shaded buttons are used for following operation. TRACK SEARCH
There are three ways to begin playback on an Audio CD at a specific track.
TITLE / CHAPTER SEARCH
Using the Number buttons
1 Press the Number buttons to enter the
desired track number.
1 4 7 2 5 8 0 3 6 9
+100
1 Press [SEARCH MODE] once for the Chapter
search, twice for the Title search during playback.
SEARCH MODE
_/2
+10
once
· Playback will start at the selected track. · To select single-digit track number, press single
0
Using [SEARCH MODE]
· Playback will start at the selected chapter or
title.
1 Press [SEARCH MODE].
SEARCH MODE
· Press [CLEAR] to erase the incorrect input. · To select single-digit chapter/title number, press
· The track search display appears.
[0] first if the total number of chapter/title in the disc 10 or more. Press [0] [2] for chapter/title 2. )
21
EN
DVD SECTION
number. Press [3] for track number 3. ) · To select track numbers which are higher than 9, press [+100/+10] first. Press [+100/+10] [2] [5] for track number 25. )
2 Within 30 seconds, enter the desired chapter/
title number using the Number buttons.
1 4 7 2 5 8 3 6 9
PLAYING A DISC / SEARCH FUNCTION
TIME SEARCH
MARKER SET UP SCREEN
1 During playback, press [SEARCH MODE]
repeatedly to display the Time Search on the TV screen.
SEARCH MODE
Use markers to memorize your favorite places on a disc.
1 Press [SEARCH MODE] repeatedly during
playback to display the Marker screen.
SEARCH MODE
1 2 3 4 5 6 7 8 9 10 AC
repeatedly
_:_ _:_ _ TOTAL 1:29:00
repeatedly
_ _ _ _:_ _:_ _
2 Within 30 seconds, enter a desired disc time
using the Number buttons.
1 4 7 2 5 8 0 3 6 9
2 Press [s] or [B] to select 1, 2, 3, 4, 5, 6, 7,
8, 9, or 10 and ensure that "- - - - : - - : - -" appears in the display.
· Playback will start at the specified time. · When there is no need to enter a number, "0"
3 When you reach the desired point, press
[ENTER].
ENTER
appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the track or title is less than 10 minutes.
· The Title or Track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press [SEARCH
MODE] repeatedly during playback to display the Marker screen. Then press [s] or [B] to choose the desired marker, then press [ENTER].
SEARCH MODE
repeatedly
ENTER
NOTE
· Operations which erase all Markers:
Turning off the power. · To clear a marker: Press [s] or [B] to select a cursor on to the marker number and press [CLEAR]. [. . . ] Al presionar suavemente el disco para introducirlo en la ranura, su reproducción empezará automáticamente, luego cierre la puerta del disco manualmente.
· La reproducción empezará desde el primer capítulo/pista del disco.
· Si la reproducción no empieza automáticamente,
presione [PLAY O].
· Cuando reproduzca un DVD que incluya un
ES
menú de títulos, este menú puede aparecer en pantalla. - 42 -
MENÚ DE DISCO 1 Presione [DISC MENU].
DISC MENU
REANUDACIÓN
1 Durante la reproducción, presione [STOP C].
REANUDACIÓN ACTIVADA
· Aparecerá el menú principal de DVD. · Si esta función no está disponible,
el símbolo puede aparecer en la pantalla del televisor. · Si el menú de disco está disponible en el disco, aparecerán las opciones de idioma de audio, de subtítulos, capítulos del título y otras para su selección.
STOP
Presione 'PLAY' para reproducir desde aquí. [. . . ]