User manual EMGETON C1

[. . . ] During the set up mode they are only used as a cursor for confirming and exiting remote control programming. To return to beginning status, please press the EXIT key or the device key (e. You can't control your device as normal menu function during the setup. POWER CH+ CH- VOL+ VOL/MUTE), if none of the keys of your new remote control can work, or most of the keys work improperly, or keys, until all basic functions operate please try another brand code by the properly. [. . . ] Press and hold the SET key on your remote control for more than 3 seconds, then release it. LCD shows "Waiting", point the transmitter of the original remote control remotes face to the receiver window of this universal remote control by approximately 50mm apart. Check the function of the key - see if the device reacts, if not, try to run learning again. DELETE THE LEARNT KEY If you like to delete a learnt command, you can follow the steps as below: TV ) which the command you like to delete from. Press KEY", press the key which should be deleted, , , SURE DELET" appears, confirm then by OK key, LCD shows "Success!Repeat step 3 to delete next keys, exit to the normal mode by pressing the device key. Press DEV", press the device key which should be deleted, , , SURE DELET" appears, confirm then by OK key, LCD shows "Success!Repeat step 2 to delete next devices, exit to the normal mode by pressing the EXIT key. Press ALL", , , SURE DELET" appears, confirm then by OK key, LCD shows "Success!LCD shows "SET UP", confirm by OK key, LCD shows , , SELECT KEY". This means you want to turn the TV(Device) power on(function), input toAV(function) and DVD(Device) power on(function). After setting of maximum 10 keys, confirm by OK key, LCD shows "Success!SET UP THE CLOCK You can set up the clock on your remote control and the time will be displayed 1. Press and hold the SET key on your remote control for more than 3 seconds, then release it. Press the or key to select desired setup items such as "Hour, Minute, AM or PM", then enter value by the digit keys, confirm then by OK key. VOLUME LEVEL LOCK This function makes it very convenient when you only use one device to adjust volume. For example, you may use your amplifier as your main volume control, then you can use this function to fix the volume and mute key of AUX, no matter which device you will use (even you will use TV, DVD, VCR etc), the volume and mute key on remote control still control the volume and mute of your amplifier. Press and hold the SET key on your remote control for more than 3 seconds, then release it. DEVICE LOCK You can use Device lock function to fix current device code. This device code cannot be changed by brand and code set up or auto search. [. . . ] Press and hold the SET key on your remote control for more than 3 seconds, then release it. To return to beginning status, please press the EXIT key or the device key (e. You can't control your device as normal menu function during the setup. Be careful when storing the device, do not expose to chemicals and do not use or place it at the following places: - places with high humidity - places with strong magnetic fields - places with extreme temperatures - directly under the sunshine or near the equipment that generates heat DEVICE WARRANTY INFORMATION The warranty does not apply for compatibility of all devices, especially for devices manufactured after production date of the universal remote control and also for the learning function on some original remote controls, and especially for non-original remote controls. [. . . ]