User manual EPSON MX21

[. . . ] User's Guide NPD4256-00 EN Epson AcuLaser MX21/MX20 Series User's Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again. *2 Available only when USB I/F is set to On. *3 Available only when a USB external device with D4 support is connected. The contents of the settings depend on the USB external device settings. *4 If the Get IPAddress setting is set to Auto, this setting cannot be changed. *5 When the Get IPAddress setting is changed from Panel or PING to Auto, the panel setting values are saved. Then Auto is changed back to Panel or PING, the saved setting values are displayed. The value is set to 192. 168. 192. 168 if the settings are not made from the panel. USB I/F Allows you to activate or deactivate the USB interface. Buffer Size Using the Control Panel 146 Epson AcuLaser MX21/MX20 Series User's Guide Determines the amount of memory to be used for receiving data and printing data. Note: To activate Buffer Size settings, you must turn off the printer for more than five seconds then turn it back on. Or, you can perform a Reset All operation, as explained in "Reset Menu" on page 149. Make sure the Data light is not flashing when you reset the printer. Network Menu See the Network Guide for each setting. USB Host Menu This menu allows you to use the USB Host printing function. For instructions on using the function, see "Printing Directly from a USB Memory" on page 64. Item USB Host* Settings (default in bold) On, Off * After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again. USB Host Enables you to print directly from a USB memory via a USB Host interface. E-mail Server Settings Item Auth Method Auth Account*2 Settings Off, POP before SMTP, SMTP Auth*1 Up to 30 characters Using the Control Panel 147 Epson AcuLaser MX21/MX20 Series User's Guide Item Auth Password*2 Sender Address SMTP Server Addr*3 SMTP Srvr Port Num POP3 Server Addr POP3 Srvr Port Num Connection Test Settings Up to 20 characters Up to 64 characters Up to 50 characters 0 . . . 65535 - *1 Authenticates automatically using the LOGIN, PLAIN, or CRAM-MD5 method. *3 If Host Name is entered, the IP Address setting is ignored. Note: If you have any questions about mail server settings, ask the mail server administrator. The following characters can be entered to Auth Account, Auth Password, Sender Address, SMTP Server Addr, and POP3 Server Addr, using the Numeric Keyboard. Alphabetic/Symbol 1 2 3 4 5 6 7 8 9 0 * @, . / abcABC defDEF ghiGHI jklJKL mnoMNO pqrsPQRS tuvTUV wxyzWXYZ Space Numeric 1 2 3 4 5 6 7 8 9 0 * Using the Control Panel 148 Epson AcuLaser MX21/MX20 Series User's Guide Alphabetic/Symbol # -. *#!", ;:`_=/|'?$@%&+¥~^()[]{}<> Numeric # Reset Menu Clear Warning Clears warning messages that show errors except for these that occur from consumable products or mandatory-replacement parts. Clear All Warnings Clears all warning messages that appear on the LCD panel. Reset Stops printing and clears the current job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully. Reset All Stops printing, clears the printer memory, and restores the printer settings to their default values. Note: Performing Reset All clears print jobs received from all interfaces. Reset Maintenance Counter Reset the maintenance unit life counter when you replace the maintenance unit. For instructions on replacing the maintenance unit, see the documentation supplied with the maintenance unit. Note: Performing Reset Maintenance Counter stops printing, clears the printer memory, and restores the printer settings to their default values. [. . . ] Note for Bonjour (Rendezvous) users: If your printer model is not automatically selected in the Printer Model list, you need to reinstall the PostScript printer driver. Note for IP Printing users, USB or Bonjour (Rendezvous) users: Select your printer from the Printer list, then select Show Info from the Printers menu. Select Installable Options from the pop-up list, then make the necessary settings. Then quit Print & Fax (for Mac OS X 10. 5 or later) or Printer Setup Utility (for Mac OS X 10. 4 or below). Accessing the PostScript printer driver You can change the PostScript printer driver settings in the PostScript printer driver. Changing the printer setup settings You can change or update the printer setup settings according to the options installed in your printer. [. . . ]