User manual ETON E1XM

[. . . ] www. etoncorp. com E1 MANUAL A M / F M / S H O RT WAV E / X M R E A DY R A D I O E1XM MANUAL E1 AM/FM/Shortwave/XM Ready Radio E1 DISPLAY DESCRIPTION (See page 16) FRONT PANEL DESCRIPTION (See page 11) 1 1 2 3 20 19 2 3 SIDE PANEL DESCRIPTION (See page 18) 18 4 5 6 7 8 9 4 17 16 15 5 6 7 8 14 13 12 11 10 9 DECLARATION OF CONFORMITY RESPONSIBLE PARTY : TEL: TRADE NAME: MODEL NUMBER: etón Corporation TOP PANEL DESCRIPTION (See page 15) 1 2 1015 Corporation Way Palo Alto, CA 94303 USA (650) 903-3866 etón Corporation E1 3 This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. 1 E1XM MANUAL IMPORTANT SAFEGUARDS An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces m ay cause the appliance and cart combination to overturn. The lightning flash with arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] You should then be able to use the `TUNING' knob to scroll between channels "0" (radio ID number) and "1" ("Preview" channel). 32 33 E1XM MANUAL INTRODUCTION TO XM SATELLITE RADIO continued Subscribing To receive more than channels "0" and "1", it will be necessary to subscribe to the service. To do this, contact the provider by phone at 1-800-852-9696 or contact them on the Internet at www. xmradio. com. If the Internet is used, scroll to the bottom of the home page and click on "Activate Radio" and follow the online instructions. Be prepared to supply the 8 digit Radio ID, (tune to channel 0 to display ID) as well as your method of payment. Then leave the unit turned on and tuned to the Preview Channel (Channel 1) to receive the activation code. Once activation is received, you will be able to receive all purchased channels. `TUNING' Knob Channel Entry In XM mode, the `TUNING' knob scrolls through XMALL channels, all channels in a given CATEGORY, or all FAVORITE channels one at a time. If the `FAST/TUNING LOCK' key is pressed, "FAST" appears on the display and the `TUNING' knob scrolls through XM-ALL channels six at a time. If the `FAST/TUNING LOCK' key is pressed when in the CATEGORY or FAVORITES modes, the receiver will revert to XM-ALL mode. Direct XM Channel Entry You can tune to any XM channel using the `TUNING' knob, or if the desired channel number is known, by using the `Direct-Key-Input' keys. For example to enter channel 76, press `7', `6', `ENTER' OR `7', `6', `. ' Please note that the `. ' key also acts as an enter key. You will hear a confirming beep and the receiver will switch to that channel. XM DISPLAY OPTIONS INTRODUCTION TO XM SATELLITE RADIO continued BASIC XM DISPLAY In the BASIC XM DISPLAY illustration above, the items labeled "CATEGORY", "CHANNEL", "ARTIST", and "TITLE" always show the category (Jazz&Blues, Classical, Country, etc. ), channel name, performer name, and selection/program title respectively. · The fifth line, labeled "XM MODE", shows whether the receiver is operating in XM ALL, CATEGORY, or FAVORITES mode. Which of these modes are displayed is determined by a single press of the `XMALL', CATEGORY, or FAVORITES' softkeys. · The item labeled "SELECTED CH" in the illustration is the reverse video curser, which can be scrolled through the available channels using the `TUNING' knob or the `< SELECT >' keys. Selectable Info There are several options available for the items labeled selectable info. Normally, selections are shown here six at a time, including the reverse video curser. At the bottom of the display, there are three softkeys labeled "CHAN", "ARTIST", and "TITLE". Pressing each of these softkeys will cause the six displayed selections to show the channel name, name of the performer, or title of the selection / program respectively. The first press of the `XM ALL', `CATEGORY', or `FAVORITES' softkeys will have the following affect: · `XM ALL' will allow scrolling through all available XM channels in numerical order one at a time with the `TUNING' knob and six at a time with the `< SELECT >' keys. · `CATEGORY' allows the `< SELECT >' keys to scroll through all available categories. [. . . ] When finished, press the `9' key to exit the timer programming mode. Tune the E1 to the radio station that you wish to hear when the timer turns on. USING TIMER 2 AS A SLEEP TIMER Sequentially press the MENU key to display the TIMERS MENU. Use the `4' key to select the turn-on time and clear any entry in this window using the CLEAR/LOCK and STORE keys as described above. [. . . ]