User manual FISHMAN CONCERT PICKUPS INSTALLATION GUIDE

[. . . ] CONCERT SERIES PICKUPS INSTALLATION GUIDE www. fishman. com Read Me First! If you are unfamiliar with these products, please pay close attention to the dimensional requirements for installation. [. . . ] Special care must be taken not to damage the pickup wire when tooling the bridge blank. Installing The Jack For Violin and Viola: After fitting the pickup, place the jack to the left of the chinrest on your violin or viola (Figure 3) and tighten it with the enclosed chinrest key (Figure 2). For Cello: After fitting the pickup, mount the adhesive-backed jack holder to the back of the tailpiece. Peel off the release film and press the holder firmly in place below the fine tuning machines of the tailpiece. Position the holder so that the jack will be at a right angle (90 degrees) to the tailpiece (Figure 4). [. . . ] Since the wire is somewhat microphonic, it should not be allowed to lie on the face of the instrument. Violin Viola Cello x = 4. 0mm Figure 1. x = 4. 1mm x = 10mm Figure 2. Figure 3. Figure 4. 514-300-005 Rev A 3-08 www. fishman. com [. . . ]