User manual FLYMO LC400 PD

[. . . ] Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed. Never lift the rear of the mower while starting the engine or during normal operation. [. . . ] IMPORTANT - Once the product has fuel or oil in the tanks do not tilt the machine at an angle of more than 30º. A)Persons under 16 years of age and persons who are not familiar with the user instructions must not use the lawn mower. B)The operator is responsible for the safety of other people in the working area. Keep children and domestic animals at a safe distance when the lawn mower is in use. , for flattening out bumps in the ground, such as mole-hills or ant- hills). E)Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed. Under no circumstances open the fuel tank cap or add petrol when the engine is running or when it is still hot. L If the petrol has overflowed, do not under any circumstances start up the engine. Move the mower away from the area where fuel has bean spilt and avoid any source of possible ignition until the petrol fumes have dissipated. E)Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. G)Exercise extreme caution when turning or when pulling the lawn mower towards you. H)Particular precautions must be taken when mowing on slopes or downhill stretches: lUse appropriate antislip footwear. Deflector, grass catcher) are securely in position and in good condition. Failure to do so may result in foreign objects being ejected by the blade. L) Take care when starting the engine and be sure to follow the user instructions. Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running. M) Never lift the rear of the mower while starting the engine or during normal operation. [. . . ] C)Turn off the engine, wait until the blade has stopped and remove the spark plug cap before: l transporting, lifting or moving the machine away from the working area; l carrying out maintenance or cleaning, or when carrying out any operation on the blade; l adjusting the cutting height; l leaving the machine unattended. Switch off the motor and disconnect the spark plug before undertaking any maintenance work. LFor a four stroke engine, check the oil level and change the oil when dirty. [. . . ]