User manual FUTABA R6004FF
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FUTABA R6004FF. We hope that this FUTABA R6004FF user guide will be useful to you.
Manual abstract: user guide FUTABA R6004FF
Detailed instructions for use are in the User's Guide.
[. . . ] max.
Antenna Precautions
Do not fold or cut tenna as it cause the receiver anshorter range. [. . . ] away from Keep to avoid the conductive material short circuit.
Usage Precautions
This model is designed for short range application such as indoor use aircrafts. · Transmitter's antenna must NOT point to the receiver when flying as specified in the transmitter's instruction. · Please be sure that the ESC's regulated output for receiver has enough capacity to sustain the entire operating condition of your servos, battery, and motor. · After the linking is done, please cycle receiver power and check if the receiver to be linked is really under the control by the transmitter to be linked. · Please do not perform the linking procedure with motor's main wire is connected as it may result in serious injury.
Easy Link Switch
Press and hold, One(1) second to re-set F/S position for 3ch. (with TM7, TM8)
Range Check the Radio
1 2
1
Please follow the transmitter's instruction manual and check if the range is over 10 paces.
More than two(2) seconds to relink the transmitter's ID.
* Place the transmitter within 2 ft. (60cm) to re-link. )
LED Antenna Connectors
1: CH1 servo 2: CH2 servo 3/MC: CH3 servo/ESC connector 4: CH4 servo 4: CH4 2: CH2
R6004FF Specifications
· Power requirement: 4. 0V-8. 5V · F/S and Battery F/S function (for channel three) · Battery F/S voltage: 3. 8V · Size: 20. 5x35. 3x7. 5mm (0. 81x1. 39x0. 30in. ) · Weight: 3. 8g (0. 13oz. )
Compliance Information Statement (for U. S. A. )
This device, trade name Futaba Corporation of America, model number R6004FF, complies with part15 of the FCC Rules. [. . . ] TEL (217)398-8970 or E-mail: support@futaba-rc. com (Support) TEL (217)398-0007 or E-mail: service@futaba-rc. com (Service)
Easy Link Button LED Indication
Green Off Solid Blink Red Solid Off Off Status No signal reception Receiving signals Receiving signals but ID is unmatched Unrecoverable failure (EEPROM, etc. )
3/MC: CH3/ESC
1: CH1
FUTABA CORPORATION Phone: (043) 296-5118 Facsimile: (043) 296-5124 Makuhari Techno Garden Bldg. , B6F 1-3 Nakase, Mihama-ku, Chiba 261-8555, Japan 1M23N17417 ©FUTABA CORPORATION 2008, 11 (1)
Alternate blink [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FUTABA R6004FF
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FUTABA R6004FF will begin.