User manual GAGGIA BONITA TIMER

[. . . ] Do not use the coffee maker for purposes other than that for which it was designed. To reduce risks of fire or electrical shock, do not remove the coffee maker from the base during the brew cycle. The coffee maker is only to be used with the stand provided not with any other one. If the lower vessel of the coffee maker is overfilled, boiling coffee may be ejected. [. . . ] Replace the 6-cup filter and the 3-cup adaptor filter basket and fill the 3-cup filter adapter with coffee. To make 6 cups of coffee, follow the above procedure but fill the lower recipient to the "6" level (16) and fill only the 6-cup filter with coffee (the 3-cup filter must be removed). For best results, use fine-ground Mocha coffee and press it down slightly. Screw together tightly the upper and lower recipients, place the coffee maker on the base and insert the plug into the electrical outlet and push ON/OFF bottom (20). A series of beep sound will last for 5 seconds to indicate the coffee cooking starts. A series of beep sound will last for 30 seconds to indicate the coffee is done. Unplug the base from the electrical outlet, pour the coffee and serve. PROGRAM OPERATION FOR BASE TIMER ( 1 ) When the power is on : - The EL (Electroluminescence) display is on, it will be off after one minute. - Whenever you press any key, the EL display will be on for one minute. - The LCD clock power is supported by the battery which is built in the device, so, the LCD can be kept working even the AC power is disconnected. ( 2 ) "PROG" KEY : - In the clock mode, press and hold the "PROGR" (17) key for 2 sec, the coffee pot will go into the clock setting mode, and the CLOCK icon will be flashing, press the ON/OFF key (20), the coffee pot will go back to the normal clock display. - In the clock mode, press the "PROGR"(17) key once, the coffee pot will go into the coffee cooking setting mode, and the PROGRAM icon will be flashing, press the ON/OFF key (20), the coffee pot will go back to the normal clock display. - The minute digits will be flashing, press the + key once, the minute will be increased by 1, if the + key is pressed and hold for 2 seconds, the minute digits will be increased with the speed of 8 minutes per second, the minute digits will count from 00 to 59, then the hour digits will increase by one, such as 1 : 00, if the setting is over the current timer, press the ­ key to decrease the minute as the + key does, after completing the clock setting, press ON/OFF key (20), the display ENGLISH will go back to the normal clock mode or leave it for 5 seconds the setting is confirmed automatically and the display will go back to normal clack mode. ( 4 ) COFFEE START COOKING MODE - Under the normal clock mode, if you press the "PROGR" (17) key once, the coffee pot will go into the COFFEE START COOKING MODE, the PROGRAM icon flashes. - The minute digits will be flashing, press the + key once, the minute will be increased by 1, if the + key is pressed and hold for 2 seconds, the minute digits will be increased with the speed of 8 minutes per second. The minute digits will count from 00 to 59, then the hour digits will increase by one, such as 1 : 00, if the setting is over the expected time, press the ­ key to decrease the minute as the + key does. After completing the coffee timer preset , press ON/OFF key (20), the display will go back to the normal clock mode, and the PROGRAM icon is on or leave it for 5 seconds, the new setting is confirmed automatically and the display will go back to normal clock mode and the program icon is on. If you want to stop the coffee timer function, press the ON/OFF key (20) again, the coffee timer stop and the PROGRAM icon disappears with the coffee timer memory unchanged. - When the programmed cooking coffee mode starts, the PROGRAM icon will be disappeared and the coffee pot will go back to the normal clocking mode. - Whenever user wants to enable the timer, press the "PROGR" (17) key once, the PROGRAM icon flashes, and the timer display the last timer memory setting, if it is no change, press the ON/OFF key (20), the program (timer) is enable again. [. . . ] Never immerse the lower part of the Mokcha and the base in water or other liquids. Decalcification: After some time of use, calcium deposits may form on the metal parts of the appliance. In order to preserve optimal operation, the decalcification procedure should be carried out on a regular basis to clean the inside of the coffee maker. The frequency will depend on the hardness of the water in your house and how often you use the machine. [. . . ]